Well im new to the mopar world and im starting out with this dodge that was inherited to me by my grandfather. He owned it his whole life off the dealer lot. Its in excellent condition. I like to go fast and i like to be different. So I have hired a guy to do the build. It has a stock 318 and a 727 tranny. Were going to stroke it. Were boring it 030 over, doing bottom end kit and top end kit from hughes engines, rebuilding tranny, putting shift kit in, toruqe converter, and b and m sports shifter, and for rear end still not sure off yet, and going to wedge some mickey thopmsons in there. Basically for parts, it will be Hughes cam, not sure of size, forged pistons, forged rods, 4 inch cast crank, studded, etc. top end will be edelbrock aluminum heads, edelbrock aluminium air gap intake a 750cfm demon carb, etc. It has TTI headers already and two and a half magnalfow exhaust. I will post actual specs and partnumbers and more pics as it goes on. If you have parts i can use please feel free and let me know, we ll see what we can do. Thanks, Vince
