|
Factory Vinyl Top - 70 Coronet - Stapled to the car???
#606984
02/07/10 02:08 PM
02/07/10 02:08 PM
|
Joined: Dec 2004
Posts: 59 Central Illinois
mity225
OP
member
|
OP
member
Joined: Dec 2004
Posts: 59
Central Illinois
|
The only staples were in the corners where it might shrink a bit and pull loose from the adhesive. There were 3 to 5 staples in each corner. Was that common? Should I look for a heavy duty stapler to do that again or is the adhesive better these days? Any advice available would be appreciated. Thanks! JK mity225@mchsi.com
Always looking for my next project!
|
|
|
Re: Factory Vinyl Top - 70 Coronet - Stapled to the car???
[Re: mity225]
#606985
02/07/10 02:35 PM
02/07/10 02:35 PM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
Quote:
The only staples were in the corners where it might shrink a bit and pull loose from the adhesive. There were 3 to 5 staples in each corner.
Was that common? Should I look for a heavy duty stapler to do that again or is the adhesive better these days?
Any advice available would be appreciated. Thanks!
JK mity225@mchsi.com
With todays adhesive I would not worry about staples..
|
|
|
Re: Factory Vinyl Top - 70 Coronet - Stapled to the car???
[Re: 340dart4spd ]
#606986
02/08/10 08:46 AM
02/08/10 08:46 AM
|
Joined: Dec 2004
Posts: 59 Central Illinois
mity225
OP
member
|
OP
member
Joined: Dec 2004
Posts: 59
Central Illinois
|
OK, good advice. I wasn't looking forward to another $60 dollar tool that I'd only use once or twice anyway.
Any suggestions on the best type of adhesive to buy for the top? I've got to get this multi-year project on the road this summer!
Always looking for my next project!
|
|
|
Re: Factory Vinyl Top - 70 Coronet - Stapled to the car???
[Re: mity225]
#606987
02/08/10 08:55 AM
02/08/10 08:55 AM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
Quote:
OK, good advice. I wasn't looking forward to another $60 dollar tool that I'd only use once or twice anyway.
Any suggestions on the best type of adhesive to buy for the top? I've got to get this multi-year project on the road this summer!
I have had good luck with 3m and Dap brand adhesive..
|
|
|
Re: Factory Vinyl Top - 70 Coronet - Stapled to the car???
[Re: mity225]
#606991
03/13/12 08:27 AM
03/13/12 08:27 AM
|
Joined: May 2003
Posts: 8,430 St Charles MO
70Coronet500Vert
master
|
master
Joined: May 2003
Posts: 8,430
St Charles MO
|
12 cans of 3M
Spray top and roof of car
follow directions do not get in hurry, let it get tacky to dry
get it right first time
work in sections
No matter how responsible he may seem, never give your gun to a monkey! 1970 Coronet Vert 1972 Charger 1974 Satellite Sebring Plus Sundance 2001 Ram 4x4 2002 Intrepid 2006 300C
|
|
|
|
|
|