Anyone out there have any good engine compartment pics of an E body manual(non power) disc brake car? Specifically the M/C, bracket and lines? Any help appreciated.

go thru post linked below.
Ron

https://board.moparts.org/ubbthreads/show...part=1&vc=1

Unfortunately I don't have a picture of one installed on a car, but here is one of the correct master cylinder. The casting number is 2229271.

I believe this to be the correct M/C for manual drum brakes. Hope this helps.

Sorry! Re-read the post. You wanted manuel Disc

Thanks for the pic it helps! Just found out Ebody manual disc brakes were not an option.

What year E-body was avialable from the factory with manual disc brakes?

Now im confused. Was a 71 Cuda available with manual disk brakes?

I'm not 100% sure if it was '71-'74 or if it was '72-'74 that E bodies were available with manual disc brakes. My info is that it was '71 on, but I can't recall ever seeing a manual disc '71 ebody.
But either way, if it was available on e bodies, it would have been both Plymouths and Dodges.

Thanks of course I have a 71 and need to research this. Anyone out there know 100% if a 71 Cuda was available with manual disk brakes?

Power only with discs for '71 E-bodies, see;

http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1971/71_Barracuda_23.jpg

&

http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1971/71_Challenger0018.jpg

Thanks!