3.23 and 727 speedo gear - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 3.23 and 727 speedo gear

Print Thread

Page 2 of 2

1

2

Re: 3.23 and 727 speedo gear [Re: RapidRobert] #563242 12/26/09 08:17 PM 12/26/09 08:17 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Like I said earlier a 235/60-17 tire should be 28.3 tall and per the chart you would use a 30 tooth gear...

Re: 3.23 and 727 speedo gear [Re: 1_WILD_RT] #563243 12/26/09 09:21 PM 12/26/09 09:21 PM
Joined: Aug 2009 Posts: 324 GA R roy2345 OP enthusiast
roy2345 OP enthusiast R Joined: Aug 2009 Posts: 324 GA	sorry guys.....the tire size is 225 55 17....so what gear would that be?

Re: 3.23 and 727 speedo gear [Re: roy2345] #563244 12/26/09 10:13 PM 12/26/09 10:13 PM
Joined: Jan 2003 Posts: 32,947 Grand Prairie,Texas stumpy I Win
stumpy I Win Joined: Jan 2003 Posts: 32,947 Grand Prairie,Texas	Measure the tire as instructed then look at the chart posted above. It's not rocket science. You just have to do a little work for yourself.

Re: 3.23 and 727 speedo gear [Re: 1_WILD_RT] #563245 12/26/09 11:10 PM 12/26/09 11:10 PM
Joined: Apr 2003 Posts: 12,235 Looking for a way out of Middl... IMGTX I Live Here
IMGTX I Live Here Joined: Apr 2003 Posts: 12,235 Looking for a way out of Middl...	Quote: Quote: Clocking is easy. It isn't very clear in that pic but under the arrow at the 6'oclock position there is a dot cast into the extension housing. That dot roughly lines up with the numbers that represent your gear. i.e. if you have a #30 gear line the numbers 26-31 on the adapter to the dot. Install the clamp with the tabs in the slots and your done. I agree it is easy... But not knowing about it would be bad... Your right. I though I was helping but you are a much faster typer....

Re: 3.23 and 727 speedo gear [Re: roy2345] #563246 12/26/09 11:14 PM 12/26/09 11:14 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Quote: sorry guys.....the tire size is 225 55 17....so what gear would that be? 26.8 = 32 teeth

Re: 3.23 and 727 speedo gear [Re: 1_WILD_RT] #563247 12/26/09 11:52 PM 12/26/09 11:52 PM
Joined: Aug 2009 Posts: 324 GA R roy2345 OP enthusiast
roy2345 OP enthusiast R Joined: Aug 2009 Posts: 324 GA	what I came up with 2...Thanks

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1