Re: Race car exhaust - what do you use?
[Re: Challenger 1]
#554503
12/15/09 07:17 PM
12/15/09 07:17 PM
|
Joined: Aug 2009
Posts: 2,051 Mooresburg, Tn
'72CudaRacer
top fuel
|
top fuel
Joined: Aug 2009
Posts: 2,051
Mooresburg, Tn
|
Quote:
I tried to figure out a system that would work on my car but couldn't. So I just run em open and everyone holds there ears.
|
|
|
Re: Race car exhaust - what do you use?
[Re: 512 VALIANT]
#554504
12/15/09 07:29 PM
12/15/09 07:29 PM
|
Joined: Apr 2006
Posts: 3,675 Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
512 I run the Dynomax #17224 6" round 3&1/2 inlet and outlet. They state flow at 2,200 cfm each. Have not compared them on track as opposed to open exhaust but they sound nice. I personally don't like the tin can sound of the Flowmasters. Fairly quiet till you it I used a 18" collector extension then the muffler then a section of pipe with a turn down just before the rear tire.
|
|
|
Re: Race car exhaust - what do you use?
[Re: 512 VALIANT]
#554505
12/15/09 09:01 PM
12/15/09 09:01 PM
|
Joined: Jan 2003
Posts: 344 Burlington, Ontario Canada
Dave_S
enthusiast
|
enthusiast
Joined: Jan 2003
Posts: 344
Burlington, Ontario Canada
|
I run 3 1/2 pipe from my 3 1/2 inch collectors, an H-pipe and Hooker aeroflow mufflers at the rear axle with turn downs. The mufflers are 3 1/2 in and out. The inlet and outlet are centered on the muffler and you can look right through them. Very sweet, low rumble and not raspy at WOT like some.
Dave Stillie '73 Swinger 5.7 Hemi, 88mm turbo, powerglide, cal-tracs & 8 3/4 Mega-Squirt EFI [email]8.93@149 [/email]
|
|
|
Re: Race car exhaust - what do you use?
[Re: rickstershemi]
#554506
12/15/09 09:22 PM
12/15/09 09:22 PM
|
Joined: Oct 2006
Posts: 365 Motor City
Shaker223
enthusiast
|
enthusiast
Joined: Oct 2006
Posts: 365
Motor City
|
Quote:
I run Borla collector mufflers, makes it easier to hear any issues with the moder on a given pass
Rickster
A+++
I use a 3.5" to the axle and a summit 3.5" glass pack and then a 3.0" TTI tail pipe.
|
|
|
Re: Race car exhaust - what do you use?
[Re: 512 VALIANT]
#554507
12/15/09 09:25 PM
12/15/09 09:25 PM
|
Joined: Jan 2003
Posts: 6,531 Jacksonville, FL
Chris2581
master
|
master
Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
|
Open headers all the time.I use DynoMax bullets at the house.
Nautilus Racing- We use Superformance gaskets and Turbo Action converters/products.
|
|
|
Re: Race car exhaust - what do you use?
[Re: B1KILLER]
#554509
12/15/09 10:54 PM
12/15/09 10:54 PM
|
Joined: Jan 2003
Posts: 19,382 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,382
Las Vegas
|
My Valiant with the 511 had a set of 4.5" Dynotech split flow mufflers on it with turn downs and about 4'+- of tubing. Car went 9.02 at 149 with this set up, all motor. The Barracuda has a set of Dynatech collector mufflers on it. Been bottom 8's at 168 with them. Here is some sound from the Valiant from a walkaround video. http://videos.streetfire.net/video/Walkaround-of-B1-Mopar_90841.htmHere is some of the Barracuda with a little idling http://www.youtube.com/watch?v=PuhfPsfYBKg
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Race car exhaust - what do you use?
[Re: rickstershemi]
#554513
12/15/09 11:25 PM
12/15/09 11:25 PM
|
Joined: Jan 2003
Posts: 19,382 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,382
Las Vegas
|
Hey this is supposed to be about the sounds Not my lack of driving ability.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Race car exhaust - what do you use?
[Re: Al_Alguire]
#554514
12/15/09 11:30 PM
12/15/09 11:30 PM
|
Joined: Mar 2008
Posts: 1,596 BX, CT, FL.
B1KILLER
pro stock
|
pro stock
Joined: Mar 2008
Posts: 1,596
BX, CT, FL.
|
Quote:
Hey this is supposed to be about the sounds Not my lack of driving ability.
Your ability was good, you didn't take anybody out Hopefully you go straight now, this ain't nascar
|
|
|
Re: Race car exhaust - what do you use?
[Re: 512 VALIANT]
#554515
12/15/09 11:35 PM
12/15/09 11:35 PM
|
Joined: Aug 2003
Posts: 43,284 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,284
Bend,OR USA
|
I have a simialr combination, 518 low deck pump gas motor in a Duster. I used a set of Hoocker 2 inch A body fenderwell headers and a three inch pipe from the collector to behind the rear axle and then into a Magnaflow three inch by 14 inch long oval muff exiting at the rear bumper. This is a street car and the noise is not bad until you floor it The car has gone 10:34 cork up at 128.6 MPH in the 1/4. I have not treid removing the exhaust at a 1/4 mile track yet, I have done that at a 1/8 mie track and the difference in ET was .04(four hundreds)and about a 1/4 mph, not worth the effort, especially when bracket racing.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Race car exhaust - what do you use?
[Re: Al_Alguire]
#554516
12/15/09 11:38 PM
12/15/09 11:38 PM
|
Joined: Apr 2006
Posts: 3,675 Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
Nice cars Al I'd have to say my Dynomax sounds very much like Al's Valiant. But set up like B1Killers side pipes! Nice Valiant by the way They'll be on next year for some testing
|
|
|
|
|