Looking for a diagram on how cables are routed, etc on my rear brakes for 70 E body. I'm assuming most any shop manual diagram from the ear would work.

Thanks in advance!

Here's a pic of a standard rear drum brake set up. I won't guarranty it's correct, but it should be close.

10"

at the anchor @ 12 0'clock the flat tab w the rounded ends goes on then the self adjuster cable eyelet then the front spring then the rear spring. There are several lengths of hold down spring pins (the brake nails) so if your hold down springs halfway down the side of the shoes cant be compressed enough for the round dime retainers to catch you might have the wrong ones(the nails) in the hardware kit.

Perfect, thanks everyone.