Where's the best place to get the 3/4 spring relocaton - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Where's the best place to get the 3/4 spring relocaton

Print Thread

Where's the best place to get the 3/4 spring relocaton #481063 09/27/09 12:05 PM 09/27/09 12:05 PM
Joined: Feb 2003 Posts: 515 Dayton, Ohio 6 65cuda OP mopar addict
65cuda OP mopar addict 6 Joined: Feb 2003 Posts: 515 Dayton, Ohio	i need to change my pinion angle so i might as well get a little more room while i have the perches cut off. for a 71 duster. 5508870-P5240001.JPG (63 downloads) 65 Cuda 360,3.23 SG-13.97 @99.4, 88 D100, 2000 Kota Qcab, 71 Duster 416 11.84 @110., 73 Imp ,(2)72 & (1)71 Dart Swingers GarysMocars Legendary Dealer

Re: Where's the best place to get the 3/4 spring relocaton [Re: 65cuda] #481064 09/27/09 03:59 PM 09/27/09 03:59 PM
Joined: Nov 2006 Posts: 1,458 oklahoma F forphorty pro stock
forphorty pro stock F Joined: Nov 2006 Posts: 1,458 oklahoma	I'm sure Mancini sells the MP 3/4 offset hangars and shackles. DR Diff did sell a 1/2 offset package that didn't require a hole in the frame rail to clear the head of the spring bolt like the MP kit does. I'm considering the Dr Diff kit for my duster if he still makes them.

Re: Where's the best place to get the 3/4 spring relocaton [Re: forphorty] #481065 09/27/09 05:01 PM 09/27/09 05:01 PM
Joined: Feb 2003 Posts: 515 Dayton, Ohio 6 65cuda OP mopar addict
65cuda OP mopar addict 6 Joined: Feb 2003 Posts: 515 Dayton, Ohio	i checked with him he has them but they are for the xhd springs with the 5/8 spring eye. i would like a kit for the stock springs. 65 Cuda 360,3.23 SG-13.97 @99.4, 88 D100, 2000 Kota Qcab, 71 Duster 416 11.84 @110., 73 Imp ,(2)72 & (1)71 Dart Swingers GarysMocars Legendary Dealer

Re: Where's the best place to get the 3/4 spring relocaton [Re: 65cuda] #481066 09/27/09 05:10 PM 09/27/09 05:10 PM
Joined: Jan 2004 Posts: 5,476 3 340dart4spd Parts Problem
340dart4spd Parts Problem 3 Joined: Jan 2004 Posts: 5,476	Quote: i checked with him he has them but they are for the xhd springs with the 5/8 spring eye. i would like a kit for the stock springs. P.M Me I have a new set in the box.. I have had for sometime..never used it

Re: Where's the best place to get the 3/4 spring relocaton [Re: 65cuda] #481067 09/27/09 08:08 PM 09/27/09 08:08 PM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	Unfortunately, no one makes offset spring hangers for stock A-body springs. Contact info

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1