Has anyone here run them, they are 2" from roller to the pushrod cup, so they are shorter than my cranes I have in the car now, and Im not happy with the nast push rod angle from them being taller.

Just wondering if they are good..

Here is the email from the crower rep,

"The seat height from the tip of the bearing to the bottom of the pushrod seat is 2.000” . We sell pushrods in .050” increments. YOU tell me what overall length you need."

GREAT customer service by the way!!





Kasey

I have them in my Hemi, no issues so far.


Confirm what they want as preload, Machine shop told us .080 so on a 24 tpi adjuster it works out to be (1/24=.042) 1.75-2 turns.

Anyone here run them in a small block??

Kasey