Re: Which heads
[Re: dynamite]
#464189
09/10/09 11:24 AM
09/10/09 11:24 AM
|
Joined: Jan 2003
Posts: 14,610 Not2farfromNashville, TN
Rug_Trucker
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,610
Not2farfromNashville, TN
|
I thought the Stealth's were closer to the regular Eddies?
Will your headers work with the angle plugs? MP Eddies are straight.
I don't remember what type of plugs the Stealths had. I saw some, didn't pay attention.
"The only thing to do for triumph of evil is for good men to do nothing"
"NUNQUAM NON PARATUS!"
|
|
|
Re: Which heads
[Re: Rug_Trucker]
#464190
09/10/09 11:32 AM
09/10/09 11:32 AM
|
Joined: Jan 2003
Posts: 21,083 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,083
Niles , Ohio
|
I have Stealths on my 440.Been on 2 years no problems.Power is just about the same.Either you need to have checked before install.They take a long reac plug like a SB.I changed springs retainers and keepers because I run .588 solid cam and 4 speed.Id get the ported if I bought them now.Mine have seen over 7K quite a few times.That and its street driven.Rocky
Chrysler Firepower
|
|
|
Re: Which heads
[Re: dynamite]
#464194
09/10/09 01:10 PM
09/10/09 01:10 PM
|
Joined: Apr 2003
Posts: 3,968 North Riverside IL & Lowell IN
GTXKen
super gas
|
super gas
Joined: Apr 2003
Posts: 3,968
North Riverside IL & Lowell IN
|
Quote:
Well I'm keeping my fresh 440,just changing heads.It has kb 237? pistons ,bullit cam 530 in 530 ex hyd roller,pocket ported 906's by fast Eddie. Eddy Performer intake, proform 750 carb.I would relly like to stay with Made in USA Eddy heads but work is slow and if the otb stelths will help I gotta go that way..Crane fireball ign
The heads will make similar power. If your 906 heads are ported and in good shape stick with them. Budget the price of the heads plus $200 to $500 to have them gone through. DON'T put either head on your motor OTB, they will REQUIRE clean-up.
Ken
|
|
|
Re: Which heads
[Re: GTXKen]
#464195
09/10/09 01:39 PM
09/10/09 01:39 PM
|
Joined: Jan 2003
Posts: 21,083 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,083
Niles , Ohio
|
Stealths are straight plug.Look almost like a factory head if you paint them.Mine cost 200 at the machin shop to have them checked springs changed some clean up and back cut the valves.My machinist has been doing it for 35 years a one man shop and very particular.He liked what he saw.Rocky
Chrysler Firepower
|
|
|
Re: Which heads
[Re: ireland383]
#464199
09/10/09 05:04 PM
09/10/09 05:04 PM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
master
|
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
OOTB, the Eddys flow around 10-15 CFM better than Stealths.....
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: Which heads
[Re: dynamite]
#464201
09/11/09 07:57 AM
09/11/09 07:57 AM
|
Joined: Jan 2003
Posts: 16,123 Grand Haven, MI
patrick
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,123
Grand Haven, MI
|
stock 906's peak flow ~220-230cfm (about the same as a stock X head), stealths are in the 260-270 range, and eddies are in the 270-280 range.
1976 Spinnaker White Plymouth Duster, /6 A833OD 1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!*** 2011 Toxic Orange Dodge Charger R/T 2017 Grand Cherokee Overland 2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)
|
|
|
|
|