The 7AL will not run right with a stock type coil
Been there done that recently on a motor on the engine dyno. The owner looked on a web site and found that the blaster 2 coil would supposidly work fine with a 7AL2
We finally pulled the right coil off one of his race cars and it made a big diffeence in how it ran, especially above 5500 RPM
I have used the mallory 28880 coil for years on all of the MSD gold race boxes including up to the 7AL2. Mallory use to make the 28880 coils for MSD with there stickers on them with no MSD part #, the new little red MSD coils and the newer transformer coils work well also but not any better than the early Mallory 28880 on the motors I have test so far including up to 800 HP with 13 to 1 compression ratio