Mopar M1 4500 for stage VI heads - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Mopar M1 4500 for stage VI heads

Print Thread

Mopar M1 4500 for stage VI heads #374874 07/14/09 11:56 AM 07/14/09 11:56 AM
Joined: Jan 2003 Posts: 302 Northeast Texas MoparMuscle OP enthusiast
MoparMuscle OP enthusiast Joined: Jan 2003 Posts: 302 Northeast Texas	Are there any other heads that one of these intakes will work with? 100% Mopar No Juice Added 2016 Challenger R/T Blacktop 5.7 6 SPD 2009 Ram 1500 5.7 http://moparmuscle.biz

Re: Mopar M1 4500 for stage VI heads [Re: MoparMuscle] #374875 07/14/09 12:01 PM 07/14/09 12:01 PM
Joined: Jan 2003 Posts: 17,844 S.E. Michigan ZIPPY I Live Here
ZIPPY I Live Here Joined: Jan 2003 Posts: 17,844 S.E. Michigan	If you have an RB and cut roughly .875" off of the intake flange of either a Victor head or Mopar Stage VII (7) head, the extra wide stage 6 intake will fit that combination also. It's been done at least twice that I know of...would I recommend it? Not sure, but there's definitely enough meat in the heads to do it. It was really set up as a dedicated Stage VI (6) intake and is best used that way.

Re: Mopar M1 4500 for stage VI heads [Re: MoparMuscle] #374876 07/14/09 06:09 PM 07/14/09 06:09 PM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Quote: Are there any other heads that one of these intakes will work with? Probably not without some serious and required...

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1