Posted By: MoparMuscle
Mopar M1 4500 for stage VI heads - 07/14/09 03:56 PM
Are there any other heads that one of these intakes will work with?
Posted By: ZIPPY
Re: Mopar M1 4500 for stage VI heads - 07/14/09 04:01 PM
If you have an RB and cut roughly .875" off of the intake flange of either a Victor head or Mopar Stage VII (7) head, the extra wide stage 6 intake will fit that combination also. It's been done at least twice that I know of...would I recommend it? Not sure, but there's definitely enough meat in the heads to do it.
It was really set up as a dedicated Stage VI (6) intake and is best used that way.