Re: please post your smallblock motor pics !!!!!!
[Re: drag345]
#372089
07/14/09 09:17 AM
07/14/09 09:17 AM
|
Joined: Jan 2003
Posts: 6,142 Melbourne , Australia
LA360
master
|
master
Joined: Jan 2003
Posts: 6,142
Melbourne , Australia
|
Quote:
My 360 STOCK Block,Stock Heads,Stock Crank, Stock Rods, but still my race engine!
10.6 [Email]secs@125mph[/Email]
I haven't seen that Charger out at the track in quite a while!
Here is a junk 360 that I build with a friend that has go low 11's @120mph in a Hardtop.
Factory heads, Crank, Rods, KB Hyper pistons, Air Gap Manifold, Solid camshaft, 1 3/4" headers, 825 Mighty Demon. Made 495hp and 471ft/lbs.
Car is Orange now with the new owner AL....
Alan Jones
|
|
|
Re: please post your smallblock motor pics !!!!!!
[Re: colt340]
#372095
07/15/09 08:11 PM
07/15/09 08:11 PM
|
Joined: Jan 2003
Posts: 5,281 In a town not near you.
clownzilla
|
Joined: Jan 2003
Posts: 5,281
In a town not near you.
|
Just a mild budget build for the street. 360 cubes .030 over. 11.0-1 compression Cast crank Mp pistons/rods comp solid cam .555/.555 Harland sharp roller rockers J-style heads, fully ported Big valves Holley strip dominator Kevko pan 450 H/P@6200 rpm Just a mild street toy compared to some of you guys. [image] [/image]
Last edited by cudaspaz; 07/15/09 08:13 PM.
The early bird gets the worm, and the second mouse always gets the cheese.
|
|
|
Re: please post your smallblock motor pics !!!!!!
[Re: RAY1969CARS]
#372099
07/18/09 02:41 PM
07/18/09 02:41 PM
|
Joined: Feb 2007
Posts: 2,578 sweden
1Fast340
master
|
master
Joined: Feb 2007
Posts: 2,578
sweden
|
ok im nowhere near completion on this build but it will hopefully be a nice street/Strip smallblock when its done this was just a quick pileup of stuff lying around 345cui lysholm twinscrewblower small solidroller ported eddy heads
|
|
|
Re: please post your smallblock motor pics !!!!!!
[Re: LA360]
#372100
07/18/09 08:49 PM
07/18/09 08:49 PM
|
Joined: Aug 2006
Posts: 60 Australia
drag345
member
|
member
Joined: Aug 2006
Posts: 60
Australia
|
Quote:
Quote:
My 360 STOCK Block,Stock Heads,Stock Crank, Stock Rods, but still my race engine!
10.6 [Email]secs@125mph[/Email]
I haven't seen that Charger out at the track in quite a while!
Health problems keep me from racing ( I have 5 vertebrae in my back smashed to tiny pieces from osteoporosis) but it doesn't stop me getting out in the shed when pain allow's. I need to take some new photo's as I have now built a methanol dominator for it & changed a few other things & it looks great. drag345
|
|
|
Re: please post your smallblock motor pics !!!!!!
[Re: SB449VALIANT]
#372105
07/19/09 09:13 PM
07/19/09 09:13 PM
|
Joined: Aug 2007
Posts: 498 El Dorado Ca
65signet
mopar
|
mopar
Joined: Aug 2007
Posts: 498
El Dorado Ca
|
That 461 is a big small block
1965 Plymouth Barracuda 273 M/SA 1970 Plymouth Duster 360/904 10.60s with J heads
|
|
|
Re: please post your smallblock motor pics !!!!!!
[Re: 65signet]
#372106
07/20/09 07:08 AM
07/20/09 07:08 AM
|
Joined: Feb 2006
Posts: 1,949 land of 10,000______'s
BDS871Cuda
top fuel
|
top fuel
Joined: Feb 2006
Posts: 1,949
land of 10,000______'s
|
Ray what you building? Some if not all of these SB mopars are just nuts.
Mine was a 340 from 1970 dont know what car. In 1987 this was going in my 67 Cuda street/strip. Everything was all stock, but the 340 X heads were ported. The tunnel ram had two Holley 450 cfm mech carbs. With a Lunati hyd cam it would only turn about 6300 rpm. The Cuda ran 12.20's in street trim.
22 years ago this was all I could aford and back then I only remember W-2's for aftermarket heads. And strokers, that was high dollar pro stuff.
Snap your neck, mega G-force launch, is all I want!
|
|
|
Re: please post your smallblock motor pics !!!!!!
[Re: BDS871Cuda]
#372107
07/20/09 09:32 AM
07/20/09 09:32 AM
|
Joined: Aug 2003
Posts: 4,979 new jersey usa
11secdart
master
|
master
Joined: Aug 2003
Posts: 4,979
new jersey usa
|
363 ci, 30 over 360 ( crate short block) MP Steel crank, Scat rods, JE SRP pistons, 11.2 to 1, MP 590 lift mech. cam,56cc W2 Heads, Victor W2 intake,AED 750 DP, 1 7/8 Tubular Automotive headers. 550 hp, 460 tq, Best ET 10.40 in 3150 lb. Dart, now slowed down to run 11.50s.
Last edited by 11secdart; 07/20/09 03:08 PM.
68 Dart 410 / 904 92 D150 original owner 21 Ram 1500 Quad Cab, Big Horn , Hemi ,4x4 23 Audi Q5 16 Honda HRV
|
|
|
|
|