victor heads - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech victor heads

Print Thread

victor heads #340717 06/07/09 03:31 PM 06/07/09 03:31 PM
Joined: May 2005 Posts: 146 Florida, USA H hotrodsr1 OP member
hotrodsr1 OP member H Joined: May 2005 Posts: 146 Florida, USA	Hows doing the most with the porting to these heads?and how much do they flow?

Re: victor heads [Re: hotrodsr1] #340718 06/07/09 03:49 PM 06/07/09 03:49 PM
Joined: Mar 2006 Posts: 1,402 State of Corruption camdog440 pro stock
camdog440 pro stock Joined: Mar 2006 Posts: 1,402 State of Corruption	Steve Vance racing engines claims 405 cfm on their CNC ported Victors. http://www.svrehorsepower.com/cylinder_heads

Re: victor heads [Re: camdog440] #340719 06/07/09 04:15 PM 06/07/09 04:15 PM
Joined: Sep 2008 Posts: 2,840 Flint, Michigan B1Fish540 master
B1Fish540 master Joined: Sep 2008 Posts: 2,840 Flint, Michigan	When Edlebrock first introduced this head i thought they would miss the mark if it could not flow 400 CFM. Happy to see that it indeed does flow that much! I dont know how they do it or how they can come close to an original B1..when the B1 is a more exotic head ie, big valves, long valves, big ports..big everything..lol

Re: victor heads [Re: hotrodsr1] #340720 06/08/09 11:44 AM 06/08/09 11:44 AM
Joined: Jan 2003 Posts: 5,486 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,486 SoCal	Quote: Hows doing the most with the porting to these heads?and how much do they flow? Here's a link to my post on here after porting member Gbob's MW Victors. This was a typical bracket race port job. He also wanted the heads to work at a lower rpm range, so together with the small'ish cam we achieved that. https://board.moparts.org/ubbthreads/show...amp;Search=true Brian Hafliger

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1