headers gasket - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech headers gasket

Print Thread

headers gasket #336186 06/02/09 12:25 PM 06/02/09 12:25 PM
Joined: Dec 2007 Posts: 830 east coast Otherlane OP super stock
Otherlane OP super stock Joined: Dec 2007 Posts: 830 east coast	I have a small block with W8 heads and as we know no one make gasket for the heads. what should I do for a gasket?

Re: headers gasket [Re: Otherlane] #336187 06/02/09 12:43 PM 06/02/09 12:43 PM
Joined: Oct 2004 Posts: 489 mid Ga. W5Dart378 mopar
W5Dart378 mopar Joined: Oct 2004 Posts: 489 mid Ga.	No gasket needed if it is a nice flat flange, just a bit of ultra high temp silicone. 69 340 swinger streetcar 8.13 1/8th w/1.90 60ft w/ 3.55s 69 422W9 Dart stock suspension,5.27 on 275/60s,single bar plate

Re: headers gasket [Re: W5Dart378] #336188 06/02/09 01:48 PM 06/02/09 01:48 PM
Joined: Dec 2007 Posts: 830 east coast Otherlane OP super stock
Otherlane OP super stock Joined: Dec 2007 Posts: 830 east coast	The headers are new so the flanges SHOULD be flat but I was thinking silicone because I saw ryan using it on the dyno but couldnt hear if the headers was leaking.i don't hear that noise under my hood.thanks 4 the info

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1