This molding is NOS in its original Chrysler sleeve packaging, part number 3419800.
It is the left ( drivers ) side top quarter molding for 70-71 Challenger convertible.
In flawless condition, no marks, scuffs, scratches, dents or imperfections....just removed from the sleeve for photos.
Doesn't get much better for that top restoration, or just for your driver.
Hard to find good even in used condition.
$325.00 USPS shipping included to the lower 48 from 13622 NY.
Email, pm or call 613-382-3550
Thanks for the ad
Terry

One Challenger door window rubber weatherstrip. $10

1970 Challenger driver side taillight lens. $55

Shaker hood decal. A couple of small blems. $5

71 B/E-body ignition light harness with delay relay. $75

E-body fresh air heater box vent cable with round knob. $20

1970 New E-body rally dash woodgrain decals for 4 switch dash. $40

70 Challenger dash speaker grill #2984783. $45

Shaker hood 440 six pack air cleaner base plate support brackets. New. $50

1971 Challenger passenger side rear quarter end cap molding. $30

Set of new E-body side-view mirror mounting screws for 70-74 E-bodies/71-72 B-bodies. $15

70-74 E-body brake pedal switch and bracket. $20

71 B/E-body ignition light harness complete with delay harness. $100

1970 E-body ignition key lamp. $75

Challenger 1 passenger side and 4 driver's side front parking lenses. $20 each

71-74 E-body left side lower dash bezel part #2984025. $45

Nice original E-body passenger side kick panel. Is black now but looks like it was originally burnt orange in color. $25

One pair of torsion bar adjusting bolts and nuts. $30

Challenger driver side front side marker assembly. Lens cracked and plug is missing but bezel has good chrome. $20

2 Pair of new E-body horn brackets, 1 long style, 1 short style. $15 pair

1970 Reproduction Challenger Owner's Manual. $15

1971 Challenger Owner's Manual. $25

1971 Dodge Scat Pack brochure. $20

1970 Dodge Scat Pack brochure. $20

1970 Dodge dealer sales brochure. $20

New 1970 Challenger illustrated facts and features manual. $8

Chilton's 1965-72 Barracuda/Challenger repair and tune-up guide. As-new condition. $40

October 1969 issue of Dodge News magazine featuring the new 1970 models. $20

1970 Challenger R/T Dream Machines trading card #29 featuring a purple Challenger. $3

440 Six Pack key ring that looks like a 440 Six Pack air cleaner lid. $20

Challenger R/T beer bottle coozie. Blue with white lettering. $8

2009 Dodge Challenger dealer sales brochure. $10

Prices do not include shipping. No Paypal.

gt340 at yahoo.com

Pair of 1971 Dodge Challenger taillight assemblies. Taillight assemblies are in good condition. Lenses are clean with no cracks. Asking $200 for the pair. Contact Bud: Kramden426 at aol.com

Misc E-body parts:
1973-1974 Barracuda front bumper with brackets Asking $75
Manual steering box with pitman arm-has tight spot. Asking $75
V-8 K-frame $75
Drag link $25
Contact Bud Kramden426 at aol.com

Here is an NOS 1971 440-6 trans kickdown linkage rod. There is a part number tag on the piece and it has been moved around many shelves but since the tag is not attached, if you have any doubt that this is not either NOS or the correct part please message me. I've had this for many years and now it is time to go. In examining the ends I don't see any evidence of installation. $325.00 plus the ride.
I take Paypal via friends and family....
Email to 71Shaker@gmail.com or PM me

Manual mirror, light pitting, $25, Left belt molding, minor scratches, $25, Upper fender bracket, $10, secondary hood latch, dated 0831, $50. Right side vinyl top molding, $30.
Shipping extra. No Paypal, U.S. money order only. VEIGHTPETE@GMAIL.COM

OEM Mopar 10.5” Aluminum Big block bell housing “513”. 1970-71 383,426,440 (but fits all years) In as run condition with no cracks noted. Lower bolt holes have a couple damaged threads but bolts hold true. $500 + shipping from 16602

Various Mopar A, B & E body parts for sale
OEM 3 Nipple breather $45.00
Fine Lines Metal Rear Axle Brake Line 1965-1969 C-body, 1968-70 B-Body, 1970-74 E-Body $30.00
RARE 1970 E Body Steering column lock tube with bushing $50.00
Aftermarket Sway bar brackets, poly bushing and mtg hardware $15.00
B E & A reproduction 1970-71 CUDA one long tail panel trim, located above bumper or below trunk lid $65.00
OEM refinished by PLUMBEEPER Rim Blow steering wheel with original Cuda fish-cap $1701.00 or best offer
Heater hose stencil kit with instructions for 1970 A/E body non air # 860457 83044 $40.00
Jack & black base $55.00


Contact via PM or email for questions or pics.
zabinsky4@msn.com
Cash or USPS Money Order ONLY, buyer pays shipping.

Thanks for the ad MOPARTS!

These are pair of Disc Brake hubs, and all 10 of the wheel studs, for the two piece rotors, (rotors and hubs) that are used on the 1970-72 B & E body line of cars.
4 1/2" inch bolt pattern.
All the studs are RIGHT HAND thread.

Selling at $150.00 for everything, plus $24.75 for the mailman in one of their large, flat rate box's.

Payment, i accept Pay Pal, or a USPS money order.

Any questions, do it with a pm, on this forum, and i will get bright back with you.
Thank's a lot.
Jim V.
hemi71x

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

A restored original bumper jack, with small hook for slotted bumpers. Tubular mast length approx 35.25"

$180, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An original and complete map light, switch and harness.

$100, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An NOS 37-tooth speedometer gear/pinion, with the original package. Part number 2538937.

$70, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Original 1970-only Challenger quarter edge moulding cores.

$10 each, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Original 1971-74 Challenger quarter edge moulding cores.

$15 each, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Original 1970-71 Cuda quarter top trim.

$40/each, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Original 1970-71 Cuda door top trim.

$40/each, plus shipping. Or a package deal if you restore trim. I'm never offended by offers. TWSchuler@aol.com

Original 70 Cuda headlight bezel stainless trim. Two driver side pieces available. Look at the pics for condition.

$30 each, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Original 71 Cuda grille insert stainless trim. Positions #1, #4, #4, and #6 (1 thru 6 starting from the driver side).

$20 each, plus shipping. I'm never offended by offers. TWSchuler@aol.com