Numbers say 58 392 hemi. Placed tip to flange with a 70s SB distributor it's the same depth as the SB distributor
Asking 100 plus the ride

70 B-body voltage regulator mounting bracket. $15

New chrome coil cover & coil mounting bracket. $20

NOS Cal Custom chrome radiator cap. $20

NOS Cal Custom chrome battery hold down. $25

Four new extra wide chrome valve cover hold down clamps. $10 for the set

New exhaust manifold heat stove to air cleaner flexible hose. $20

NOS fan clutch 3769614 for 1974 all V-8 engines. $100

Factory warning light type oil pressure sending unit. $10

Gauge type oil pressure sending unit. $20

Vintage Cal Custom 14" finned aluminum air cleaner with filter. $100

1970 Style single nipple oil breather with hose. $30

New 12" oval 4 barrel finned aluminum air cleaner with filter. It measures 12" L x 8 1/4" W x 3" H and has a 5 1/8" carb opening. $55

New Mopar Performance chrome water neck. Was bolted on an engine but then taken back off before the engine was ran. $10

AC alternator bracket from a mid 70s 360. $10

New Mr. Gasket chrome oil filter cover. $15

9 Chrome t-handle valve cover bolts. $10

Factory starter, part/casting #3755259. This came off of my Dart about 10 years ago. Worked fine then, been sitting on a shelf ever since. $40

Two 318 driver side spool motor mounts pt#3642811. One is used and one is NOS. $20 for the used. $35 for the NOS.

Edelbrock Elite small block valve covers EDL-4295 with bolts, breather & PCV valve. Very nice condition. $200

NOS Cal Custom chrome dagger dipstick handle. $25

New Mopar Performance 5 blade radiator fan and clutch. $100

Pioneer Automotive cylinder head dowel pins. 21 pieces 1/4" x 5/8". $10

Howard's solid flat tappet cam for Mopar big blocks, part number CL722322-08. See links below for specifications. I bought this cam for my engine with the intention of taking the car to the track when the car was finished being restored along with the engine being built but I have changed my mind about racing the car and decided to go with a milder hydraulic cam instead. I had this cam installed in my engine on the engine stand only (engine is still on the stand) so it has never been run and is essentially new. $375

New set of COMP Cams 973-16 - Inner Valve Springs. $45

2 used Holley 450 cfm carbs, part number 9776, for dual quad set-ups. Carbs are in nice shape and worked fine the last time they were used. The only thing wrong with them is on one of them the small vacuum fitting that sticks out the side needs replacing as the tube broke off. $450 for the pair.

Chrome single groove alternator pulley. $15

1975 Date coded alternator. Part #3874271. $25

Rev-n-nator Coil and programmable ICU. $200

Vintage Cal Custom scoop style air cleaner. Includes often missing matching wingnut. $300

New in boxes QTP 2 1/2" electric exhaust cutouts #QTEC50, stainless y-pipes #10250 and remote controller #10900. $654 total price at Summit. $550

Prices do not include shipping. No Paypal

Email: gt340 @ yahoo.com

For Sale. Indy rockers 1.6 for 360-1 heads , no longer available from Indy , I am told they fit big blocks also , these were spares I sold the motor $100 shipping extra lbvracing@aol.com of pm

have these heads still in the box went big block instead want $1200 cwkerr007@gmail.com prob won't get me there so pm at four 0 nine 2 four 2 one 4 00

ATK High Performance Chrysler 408 A Stroker Short Block SP61 For Sale NEW REBUILD

Purchased this engine for a potential high performance build from Summit. Had my 340 rebuilt instead
Engine still factory packed, protected in shipping crate.


-Mopar Small Block Magnum
-Actual Engine Displacement: 6.7L/408
-Rear Main Seal Style:- 2-piece
-Crankshaft Material:-Nodular iron
-Piston Material:-Hypereutectic aluminum
-Short Block Piston Style:-Dish
-Connecting Rod Beam Style:-I-beam
-Engine Block Material:-Cast iron
-Main Journal Type- Mopar LA Large
-Deck Height (in.): 9.600 in.
-Engine Balance:- Internal

ATK High Performance Chrysler 408 A Stroker short blocks include the following:

* Handpicked and seasoned OE Magnum 1993-2001 blocks
* Aligned and hone main bores
* Nodular iron internally balanced crankshaft
* 4.00 in. stroke
* 4340 forged I beam connecting rods with ARP 8740 bolts
* Hypereutectic pistons with 23.5cc dish
* Plasma-moly rings
* Approximate Compression Ratios: 62cc = 9.7:1 / 68cc = 9.2:1 / 72cc = 8.9:1


Selling below my expenditure (original core charge and shipping was over $550 plus cost of short block)

Sell for $2800. Pick up only from 07054 Parsippany, NJ

PM with interest 201-274 4887 or email a66challengerregistry61@yahoo.com
Phil

1970 340 intake manifold, nice used condition $250.00 (708) 288-2879

Custom Small Block 3,4 Speed Throttle Cable Bracket. Used, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Note: Works with any high rise intake or carburetor spacer

W-2 Small Block Throttle Cable Bracket. New, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Small Block Carburetor Throttle Return Spring Brackets. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Factory Small Block Valve Covers 318,340,360, Used, $50 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Note: All Harness, Wire Brackets Intact!

Factory Small Block Valve Cover Breather. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Valve Cover Oil Fill Caps. Used, $10 Each + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

1. Not sure!
2. 73-74 model (came of my 73 Cuda)
3. Mopar Preformance Chrome New!
Call Steve 810-629-1097
Note: Pick the one you want by photo 1-3

Small Block Spark Plug Wire Looms. Used, All 7 Looms, $25 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Small Block Heater Hose Bracket. Used, $15 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!
Call Steve 810-629-1097

Small Block Distributor Hold Down Bracket. Used, $15 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

P4120484 Fuel Pump Eccentric Small Block 273, 318, 340, 360. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

Photo 1. Used, $20 + Shipping

Casler Small Block Headers 273, 318, 340, 360. Used, $150 + Shipping. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

Water Pump To Fan Spacer 1.25 in' Thick. Used $15 + Shipping. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

63-76 Temperature Sending Switch #2426458 Used $7.50 + Shipping
62-80 Oil Pressure Sending Unit For Models With Warning Light. Used, $7.50 + Shipping.
Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

Fram CA160 Air Filter. New, $5 + Shipping. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

Note: Used On Any 2bl Motor, See Photo 2 For Application!

Factory Carburetor 3.5 in" Stud With Wing Nut. Used, $10 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!
Call Steve 810-629-1097

73-74 Electric Choke #3656730 All Models, Used, $35 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!
Call Steve 810-629-1097

Holley 4749-2 Carburetor Factory 383-440. Used, $125 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097
Note: Came Off A 70 RT/SE 383 Challenger

Gates Single Belts.New, $10 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

1.Gates Belt 7470
2. Gates Belt 7490
3. Gates Belt 7580

Call Steve 810-629-1097
Note: Pick the one you want by photo 1-3

Gates / Mopar Duel Alternator / Fan Belts.New, Price Below + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!

1.Gates Duel Belt #7541 $20
2. Mopar Duel Belt #4106241 $25

Call Steve 810-629-1097
Note: Pick the one you want by photo 1-2

TTI Standard port small block headers for e-bodies. Ceramic coated inside and outside. Some scratches and superficial surface rust in a few spots. No dings. Located in Baton Rouge. Payment via USPS money order. $675 plus shipping.

1-5/8 x 1-3/4" STEP HEADERS
B,E,F,M-BODY PART NUMBER: 340BE

HEADER FEATURES
• 1-5/8" O.D. Primary Tubes, steps up to 1-3/4" O.D. Secondary Tubes

• 3.0" Collectors

• 3/8" thick Flanges, laser-cut, contoured for a leak free fit

• Step design: Provides low-end response and top-end horsepower gain

For Sale cleaning out a bunch of my old parts : one crate of 340 pistons and rods , 9 rod and piston assemblies , 4 pistons and 16 rods , $200 or make me an offer , no shipping on this , stock small block rocker assemblies , two complete rocker /shaft assemblies , 2 spare shafts and 16 stock rockers , $125 or make me an offer , shipping extra lbvracing@aol.com or pm

Edelbrock LD4B intake manifold

Original Chrysler MOPAR intake manifold in good condition

Asking $325

I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.

Price is $490 shipped in the lower 48 states.

I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

New Mopar Performance W2 /W5 exhaust roller rockers. I have several of these so if you need more than one just ask.

Price is $38 each shipped in the lower 48 states.
Set of eight rockers is $280 shipped in the lower 48 states.

I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 12 new Mopar Performance 1.5 ratio roller rocker arms for W2 econo heads. This partial set has the 8 exhaust rockers and 4 left intake rockers. Left intake part number is P4532859 and the Exhaust part number is P4532860.I do not have any right intake rockers.

Price is $495 shipped in the lower 48 states

I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have several ignition parts for sale. Prices include shipping.

New MSD Digital 6AL ignition module part #6425 $300 shipped

Used chrome ignition box $60 shipped

Used Jegs coil $35 shipped

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. The roller wheel size is 0.80”.

The price for the 11 pairs is $650 shipped in the lower 48 States. I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my measurement.

Price for the set is $480 shipped in the lower 48 states. I will ship internationally for the extra cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. Pin is 0.984". Approximately 6cc valve reliefs.

These pistons can be used in aftermarket race blocks or stock 360/5.9 magnum engine blocks.

Price is $475 shipped in the lower 48 states. I will ship elsewhere for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.
.

I have 12 new Mopar Performance forged flat top pistons and pins. There are 3 different part numbers. There is not one complete set. Here is what I have.

P4876976 – Quantity of 6. Specs are 4.060” bore & ~ 1.67” compression height. These pistons are for a 0.060” overbore 360 with the stock stroke crankshaft or a 0.020” overbore 340 using a 3.58 stroke crankshaft.
Price for the 6 new forged pistons is $260 shipped.

P4876978 – Quantity of 4. Specs are 4.030” bore and ~ 1.67” compression height, These pistons are for a 0.030” overbore 360 with the stock stroke crankshaft
Price for the 4 new forged pistons is $160 shipped.

P5007413 – Quantity of 2. Specs are 4.030” bore and ~ 1.47” compression height, These pistons are for a 0.030” overbore 360 with a 4.00” stroke crankshaft.
Price for the 2 new forged pistons is $80 shipped.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a used electric puller fan and controller. The parts are in nice shape. Overall measurements are 16.75" x 16.25" x 4.0". The fan blades themselves are 15" diameter.

Price is $55 plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a pair of new individual W2 race head casting number P4532693. These heads have no machining performed. As delivered by Mopar including 3/8” iron valve guides and closed chambers. These heads requires the use of T&D or Jesel rocker systems.

Price is $1,100 for the set plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.