anyone replace seat belts with a 3 point setup ?
#3221410
03/19/24 12:21 PM
03/19/24 12:21 PM
|
Joined: Sep 2003
Posts: 19,408 north of coder
moparx
OP
"Butt Crack Bob"
|
OP
"Butt Crack Bob"
Joined: Sep 2003
Posts: 19,408
north of coder
|
something like a late model belt system ? as my charger still has the 55 year belts, i'm feeling a little apprehensive about their safety factor, considering the age of the thread and webbing. and please don't get me started on the "two year belt rule" courtesy of the nhra................ i prefer the original buckles, as i don't really like the "big red button" on the late model stuff. can a late model set of belts from a ??????? be fitted, or is the solution a new set of original belts or a universal setup my best option[s] ? a big TIA to those that can offer any advice to me on this subject.
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: moparx]
#3221415
03/19/24 12:29 PM
03/19/24 12:29 PM
|
Joined: Feb 2003
Posts: 10,214 Someplace you aren't
SomeCarGuy
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 10,214
Someplace you aren't
|
I bought a set a few years ago because the roads are getting very dangerous. I decided I didn’t want to ruin the stock look since my car is all oem. They are supposed to bolt into the factory location for the optional shoulder belts. They’re black, I’d sell them for less than they cost new. I got them from the big seat belt place, can’t think of the name right off.
I want my fair share
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: DGS]
#3221962
03/21/24 07:20 PM
03/21/24 07:20 PM
|
Joined: Nov 2003
Posts: 2,938 GA
roadrunninMark
master
|
master
Joined: Nov 2003
Posts: 2,938
GA
|
Were the good sets from XV Engineering. ..corrected…
Last edited by roadrunninMark; 03/21/24 07:26 PM.
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: topside]
#3221982
03/21/24 08:28 PM
03/21/24 08:28 PM
|
Joined: May 2019
Posts: 6,258 nowhere
Sniper
master
|
master
Joined: May 2019
Posts: 6,258
nowhere
|
I can't help but think that a later A OEM setup would be much better, but they apparently aren't easily found in good condition.
Those are pushing 40 years old, not sure I'd trust them in perfect condition.
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: topside]
#3222081
03/22/24 10:33 AM
03/22/24 10:33 AM
|
Joined: May 2019
Posts: 6,258 nowhere
Sniper
master
|
master
Joined: May 2019
Posts: 6,258
nowhere
|
Guess I wasn't clear enough: tested by wreck. Killed the car. Walked away.
Agree on the litigation problem. Oh dang, glad you were ok though.
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: Sniper]
#3222283
03/23/24 12:56 AM
03/23/24 12:56 AM
|
Joined: Feb 2003
Posts: 10,214 Someplace you aren't
SomeCarGuy
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 10,214
Someplace you aren't
|
Sharon’s web can redo seat belts. Also there is one like Snake Eyes or Snake Oil that does it. I checked about having a set done by Sharon and it was like 800 bucks to do all with shoulder belts if I supplied the cores. I gathered about half a set so far.
I want my fair share
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: moparx]
#3222524
03/24/24 12:36 PM
03/24/24 12:36 PM
|
Joined: Aug 2011
Posts: 2,861 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,861
Pattison Texas
|
I have the wesco van type in my junk , they work great
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: anyone replace seat belts with a 3 point setup ?
[Re: moparx]
#3222550
03/24/24 02:45 PM
03/24/24 02:45 PM
|
Joined: Aug 2011
Posts: 2,861 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,861
Pattison Texas
|
They are for a van for the high roof attaching point on or Charger
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
|
|