Air Grabber - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Air Grabber

Print Thread

Air Grabber #3219613 03/10/24 08:50 PM 03/10/24 08:50 PM
Joined: Apr 2007 Posts: 293 Colorado Springs,Colorado Roadrunner440-6 OP enthusiast
Roadrunner440-6 OP enthusiast Joined: Apr 2007 Posts: 293 Colorado Springs,Colorado	When hooking up the 2 vacuum hoses to the electric solenoid in the dash...which hose goes to what fitting or does it matter? (1970) Thanks in advance

Re: Air Grabber [Re: Roadrunner440-6] #3219685 03/11/24 10:14 AM 03/11/24 10:14 AM
Joined: Aug 2004 Posts: 2,092 New Mexico J JMCFAN top fuel
JMCFAN top fuel J Joined: Aug 2004 Posts: 2,092 New Mexico	See below 68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT

Re: Air Grabber [Re: JMCFAN] #3219718 03/11/24 12:11 PM 03/11/24 12:11 PM
Joined: Apr 2003 Posts: 164 Colorado S spk2go member
spk2go member S Joined: Apr 2003 Posts: 164 Colorado	On the can there is a green dot on the center nipple, which the hose with the green tracer connects to.

Re: Air Grabber [Re: spk2go] #3219833 03/11/24 09:06 PM 03/11/24 09:06 PM
Joined: Apr 2007 Posts: 293 Colorado Springs,Colorado Roadrunner440-6 OP enthusiast
Roadrunner440-6 OP enthusiast Joined: Apr 2007 Posts: 293 Colorado Springs,Colorado	On the illustration showing the solonoid... there is two nipples for either hose.(black or yellow) The nipples dont state which hose goes to what. Does it matter? Thanks Last edited by Roadrunner440-6; 03/11/24 09:08 PM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1