For sale: Autometer Sport Comp II tachometer and gauges. Included are a 3690 tachometer with shift light and 3692 volt, 3637 water temp and 3627 oil pressure gauges. The gauges are all electrical gauges. I bought these for a car I used to own but sold the car before ever using them. I've been hanging on to them in case I bought another car but I don't think that's going to happen so I have decided to sell them. $450 for everything. Selling as a package only. No Paypal. gt340 at yahoo.com

https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3690
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3692
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3637
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3627

This is an 1150 gas Dominator built by IRD carburetors, I pulled the bowls off and checked everything for cleanliness, it’s clean and ready to use depending on your tuning requirements, the documentation for the carb is in the first pic, this is all I know about the carb, it had maybe 10 passes on it after it was bought and was replaced with a 1250 IRD carb, any questions just ask and I will answer to the best of my ability, this carb is part of an estate sale that I am in charge of, asking 600 shipped and it comes with a 4150 to 4500 adapter if you want it, payment needs to be cash or postal money order only, thanks, pm me here or email me at alilblacktruck@gmail.com

J&W Bell housing to adapt a big block Mopar to a Powerglide, it is brand new and still in the box, transmission builder and I got our wires crossed and both bought one, so this one was not used, included is a used 8 bolt crank adapter and adapter flywheel, both are used but in good condition, I also have a 6 bolt flywheel but no crank adapter to fit it, I can include whichever one you prefer. I’ll take 650.00 shipped in the CONUS for both, there not doing any good collecting dust on my parts shelf, pm me here or email me at alilblacktruck@gmail.com, I don’t do pay pal, payment will be cash or US postal money order, thanks, Rob

all sold

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

Milodon 8 quart Nostalgia Super Stock oil pan for 318-340 small block Mopars with oil pump and swivel pickup assembly. 10" deep with draglink tube for ultimate rear sump on stock suspension Mopars. Pan was recently sent back to Milodon for new yellow/gold cad plating making it almost NEW appearance. This pan has swivel pickup as other versions were static pickup. If you are restoring an old Super Stock racecar, pan would make a perfect addition to period correct! $650 + shipping. Prefer US Postal money order or cash. E-mail GTX5877@yahoo.com or PM. more pix available

I have a Holley Hyperspark Ignition kit that came with a project car that Im working on for a customer. It has the distributor, coil and ignition box. All new in the boxes. The distributor was installed to check clearance then put back in the box. Previous owner bought it thinking it would work with a carb application. According to Holley it wont. Must use fuel injection. Will sell the whole kit for $700. I have pictures I can send also.

I have a set of new set of Hooker 5320-1 ceramic coated headers that came on the same project car. They are way to big for what Im working on. They are the 2 1/8 tubes. Way to much for a 413 Max wedge. They are brand new but have been installed so they have small scrathes and a couple marks from install. They have never been run. They are currently unavailable from Hooker so it is hard to get a good list on price, but all the listing is around $1100. Will sell these for $900 or trade towards Max Wedge manifolds. I have pictures I can send of all parts.

Used MSD 2-Step Part#8739. Works only with analog system. Asking $45.00 plus shipping. Located in Ohio 43612. PM if interested

Used MSD RPM Module Selector Part#8670. Asking $30.00 plus shipping. Located in Ohio 43612. PM if interested.

Used Dedenbear Trans-Brake Push Button Switch Part #PBSXL. Asking $35.00 plus shipping. Located in Ohio 43612 PM if interested.

Used AutoMeter Sport-Comp Monster Tachometer, Part #3903, 0-10,000 RPM, 5 inch, Analog with shift light. Asking $125.00 plus shipping. Located in Ohio 43612. PM if interested

Used Painless 8-Switch Panel. Part #50303. Fused w/lighted switches. Asking $125.00 plus shipping. Located in Ohio 43612. PM if interested.

PPP shifter with air shifting set-up. For 727 with safe neutral. Comes with CO2 tank(small one), tank mounting bracket, new Mac valve, 6' cable, floor mount for shifter, and mount for fire suppression cable. Needs a regulator ($100) and shifter lever for on trans($25). Around $1100 if bought new. Black in color. Works awesome, I switched transmission set-ups. I can text pics, not sure on how posting them on here anymore. $550 plus shipping. PayPal or cash. If using PayPal add enough to cover the fees if using goods and services.

MSD Front drive distributor kit and Weber mount with MSD adapter- Both new. $550. Aluminum door stand $100, Stroud Cam lock belts- Blue. SFI ran out last year $85. Parts are in Charleston SC and can be shipped although door stand may be expensive due to size and box required.
Distributor and belts are sold

Mopar Performance Small block Tach Drive distributor for sale.
very slightly used piece. comes in the original MP box.
asking $160.00 shipped anywhere in the lower 48 states. [offer ?]
contact me here, or : moparxz "at" comcast "dot" net.
put sb tach drive distributor in subject line.
Thanks for the add MOPARTS !

update

update

Fresh machining from QMP, ex pro stock truck block.
Building a larger tall deck W8 engine so this block needs to go.
Mopar Performance 4876381AB
9.016 height, square decked
Uses 60mm roller cam with bearings installed
48 degree
liter bores bushed and honed .904
4.200 bore diamond honed with torque plate
Sonic checked can go 4.225
Short fill to bottom of freeze plugs
4 bolt aluminum 340 mains with ARP studs line honed
Block requires a motor plate
External oiling Wet or Dry sump
Blocks ready to build located in Santa Barbara Ca
Asking $3800 for the bare block, willing to assist with crating and freight worldwide.

SOLD