|
|
Re: Production 440 steel crank WIW
[Re: A727Tflite]
#3179104
09/28/23 08:18 PM
09/28/23 08:18 PM
|
Joined: Jan 2003
Posts: 43,523
Round Lake Beach, Illinoisy
Rhinodart
Rhinotruck
|
Rhinotruck
Joined: Jan 2003
Posts: 43,523
Round Lake Beach, Illinoisy
|
Tough to say there are so few of them out there nowadays. I have seen them for $350-400 but don't know if they sold. I am in the market, but last time I bought one I had to get a short block for $650 just to get a good crank...
The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it.
JB Rhinehart, Realist
A-Body's RULE!
|
|
|
Re: Production 440 steel crank WIW
[Re: migsBIG]
#3179284
09/29/23 01:21 PM
09/29/23 01:21 PM
|
Joined: Aug 2005
Posts: 4,101
Yes
sixpakdodge
master
|
master
Joined: Aug 2005
Posts: 4,101
Yes
|
Really, they worth that much? I was just going to throw 4 cranks out because the machine shop said it would cost $300 each to polish and it would probably be cheaper to buy a new one. 440 Source wants $899 for a new one, plus shipping. Any new crank should still get checked too as far as tolerances, etc. So figure with shipping and misc, you're going to have $1k in a new crank.
|
|
|
Re: Production 440 steel crank WIW
[Re: fastmark]
#3179590
09/30/23 02:32 PM
09/30/23 02:32 PM
|
Joined: Jul 2004
Posts: 3,805
Arlington, Texas
bobby66
master
|
master
Joined: Jul 2004
Posts: 3,805
Arlington, Texas
|
I don’t run across many bare cranks now days, but I just bought std steel cranks for $100 each. Perfect std and both will work with a polish. I have sold cranks for $250. I don’t sell many now. I used to pay $250 to get them ground but I’ve got a lead on a place that will do a really good job for $100. I just have to travel 150 miles. All the shops here are just taking them the distance as a group. I’ll take the next batch and get about four done for future use. Are you bringing them to DFW?
|
|
|
|
|
|
|
