0.025 - 0.030" Offset Dowel Pins - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 0.025 - 0.030" Offset Dowel Pins

Print Thread

0.025 - 0.030" Offset Dowel Pins #3156256 07/02/23 03:18 PM 07/02/23 03:18 PM
Joined: Sep 2018 Posts: 169 West Palm Beach, Florida C Craig J OP member
Craig J OP member C Joined: Sep 2018 Posts: 169 West Palm Beach, Florida	Source for 0.027" offset dowel pins for a mid 70's 440 block?

Re: 0.025 - 0.030" Offset Dowel Pins [Re: Craig J] #3156265 07/02/23 03:45 PM 07/02/23 03:45 PM
Joined: Nov 2003 Posts: 1,365 Out of the State of Confusion blue_stocker pro stock
blue_stocker pro stock Joined: Nov 2003 Posts: 1,365 Out of the State of Confusion	Jegs/Summit/Amazon...they're made by several companies; Mr Gasket, Holley/Quicktime/Lakewood, Moroso...a google search should get you in the area you need to go...wb Last edited by blue_stocker; 07/02/23 03:45 PM. I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them. Thomas Jefferson Freedom must be repurchased by every new generation General Daniel Jones, WW2 Tuskegee Airmen

Re: 0.025 - 0.030" Offset Dowel Pins [Re: Craig J] #3156272 07/02/23 04:34 PM 07/02/23 04:34 PM
Joined: Jan 2003 Posts: 2,735 541 slobovia A990 master
A990 master Joined: Jan 2003 Posts: 2,735 541 slobovia	https://www.robbmcperformance.com/products/dowels.html His are Mopar correct diameter, and removable

Re: 0.025 - 0.030" Offset Dowel Pins [Re: A990] #3156294 07/02/23 05:49 PM 07/02/23 05:49 PM
Joined: Sep 2018 Posts: 169 West Palm Beach, Florida C Craig J OP member
Craig J OP member C Joined: Sep 2018 Posts: 169 West Palm Beach, Florida	The 0.021 from Robb will probably end up still having .006 - .007 run out. On the bright side, Robb is willing to make a set of 0.027 offset... but with a 100 piece min order...

Re: 0.025 - 0.030" Offset Dowel Pins [Re: Craig J] #3156326 07/02/23 08:06 PM 07/02/23 08:06 PM
Joined: Jan 2003 Posts: 6,419 Abilene, Texas F fastmark master
fastmark master F Joined: Jan 2003 Posts: 6,419 Abilene, Texas	I’ve found out that the RobMC dowels are still not as good as the original ones from Mopar. Since they are not a solid chunk, they will give a few thousands and sag. AND the hole in the Lakewood scatter shield is .500 instead of the .496 it should be. The last one I did was very frustrating to get close.

Re: 0.025 - 0.030" Offset Dowel Pins [Re: fastmark] #3156328 07/02/23 08:13 PM 07/02/23 08:13 PM
Joined: Jan 2003 Posts: 2,735 541 slobovia A990 master
A990 master Joined: Jan 2003 Posts: 2,735 541 slobovia	Good to know, thanks

Re: 0.025 - 0.030" Offset Dowel Pins [Re: A990] #3156349 07/02/23 09:43 PM 07/02/23 09:43 PM
Joined: Oct 2005 Posts: 8,884 Ontario, Canada S Stanton Don't question me!
Stanton Don't question me! S Joined: Oct 2005 Posts: 8,884 Ontario, Canada	A deadblow mallet is usually good for a couple thou !!

Re: 0.025 - 0.030" Offset Dowel Pins [Re: A990] #3156364 07/02/23 10:45 PM 07/02/23 10:45 PM
Joined: Aug 2003 Posts: 43,237 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,237 Bend,OR USA	The set I bought from Robb MMc several years ago had the .027 included Last edited by Cab_Burge; 07/04/23 01:39 PM. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: 0.025 - 0.030" Offset Dowel Pins [Re: Cab_Burge] #3156475 07/03/23 10:42 AM 07/03/23 10:42 AM
Joined: Jan 2003 Posts: 4,275 Morrow, OH markz528 master
markz528 master Joined: Jan 2003 Posts: 4,275 Morrow, OH	If you truly can’t find any I can make them for you. 67 Coronet 500 9.610 @ 139.20 mph 67 Coronet 500 (street car) 14.82 @ 94 mph 69 GTX (clone) - build in progress......

Re: 0.025 - 0.030" Offset Dowel Pins [Re: markz528] #3156787 07/04/23 08:00 AM 07/04/23 08:00 AM
Joined: Sep 2018 Posts: 169 West Palm Beach, Florida C Craig J OP member
Craig J OP member C Joined: Sep 2018 Posts: 169 West Palm Beach, Florida	Originally Posted by markz528 If you truly can’t find any I can make them for you. Thank you very much for the offer. I sent an email with photos to the the TKX kit supplier, lets see what they say tomorrow.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1