Finally DONE! What will it run?!?!?
#3142436
05/04/23 08:19 AM
05/04/23 08:19 AM
|
Joined: Jan 2005
Posts: 3,635 Oakland, MI
dizuster
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,635
Oakland, MI
|
Well after about a year and a half of work, my '62 is finally converted over from the old small block turbo combo and ready to run.
I have had so much help from so many people, but more than anyone my Dad (dvw) has just put in HUNDREDS of hours into this car. No doubt I would have eventually gotten it done, but no where near the quality and craftsmanship level he brought to the project. Not to mention the hours my Mom put in helping on the interior, giving up time with my Dad, and keeping us alive!
HardcoreB built a hell of a motor for the combo too, and went above and beyond the original commissioned engine build he took on.
So here is the combo, and the obligatory moparts question for any new build.... what will it run?
3570lbs with driver ready for the starting line (heavier than I was hoping!) 4.10 Dana with Caltracs, 29.5 x 10.5 Pro Bracket Radials, and Mencer Double Adjustable Afco's 727 with good strong parts and Aluminum Drum. TA 8" converter spec'd for the combo (target 6200 stall)
486" Low Deck (4.385" bore x 4" stroke) Indy SR Heads, w/ 2.25" ti valves (flow 360cfm?) 275@.050 / .762" Lift Roller Cam, T&D 1.6 rockers, with PAC Springs Crower Ultra light crank, BME Aluminum Rods, with flat top pistons (12.2:1 compression) Hooker 2-1/8" headers with 3.5" collector Mod Man intake (which we named the SeanMan after the heavy runner length/porting/design changes of HardcoreB's work.) Two 750 AFB's Electric water pump & Vacuum pump pulling 10~12"
Last edited by dizuster; 05/04/23 08:28 AM.
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: dizuster]
#3142437
05/04/23 08:21 AM
05/04/23 08:21 AM
|
Joined: Jan 2005
Posts: 3,635 Oakland, MI
dizuster
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,635
Oakland, MI
|
Really happy with the interior.
Last edited by dizuster; 05/04/23 08:24 AM.
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: dizuster]
#3142444
05/04/23 08:44 AM
05/04/23 08:44 AM
|
Joined: Jan 2003
Posts: 10,043 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,043
MN
|
By the way the engine sounds, it will run 9.90's, but I think the 4.10's might slow it down some, and need a 4.56 rear gear. Just My opinion. I think 10.25's are reasonable.
69 GTX
68 Road Runner
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: JERICOGTX]
#3142457
05/04/23 09:39 AM
05/04/23 09:39 AM
|
Joined: Feb 2005
Posts: 20,195 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,195
PA.
|
No really good at these guessing games but I’m sure it will run great. Nice job guys. Now go have fun.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: pittsburghracer]
#3142464
05/04/23 10:11 AM
05/04/23 10:11 AM
|
Joined: Jan 2003
Posts: 8,174 Plymouth, MI
Blusmbl
master
|
master
Joined: Jan 2003
Posts: 8,174
Plymouth, MI
|
Thinking 9.80's at Lapeer or Martin, and 10.20's at Milan if you go on a night when they aren't radial prepping. The car looks outstanding, love the interior and patina!
'18 Ford Raptor, random motorcycles, 1968 Plymouth Fury III - 11.37 @ 118
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: pittsburghracer]
#3142466
05/04/23 10:13 AM
05/04/23 10:13 AM
|
Joined: Jan 2003
Posts: 13,380 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,380
Marion, South Carolina [><]
|
Awesome job! I'm gonna say 9.70s-9.80s. ![shruggy shruggy](/ubbthreads/images/graemlins/custom/shruggy.gif)
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: gregsdart]
#3142477
05/04/23 11:13 AM
05/04/23 11:13 AM
|
Joined: May 2019
Posts: 713 Lake Villa Il
INTMD8
super stock
|
super stock
Joined: May 2019
Posts: 713
Lake Villa Il
|
No idea what it will run but certainly looks awesome. Nicely done.
69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 650rwhp @7250 510rwtq @5700
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: gregsdart]
#3142479
05/04/23 11:19 AM
05/04/23 11:19 AM
|
Joined: Apr 2007
Posts: 47 S.E. Michigan
TruPerformance
member
|
member
Joined: Apr 2007
Posts: 47
S.E. Michigan
|
I'm going to guess 9.70's @ around 136 for the first outing, then you guys will continue to drop from there.... probably a 9.50 or better in it before the year is over.
1963 Belvedere (mine) 1969 Roadrunner (wife's)
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: dizuster]
#3142517
05/04/23 02:18 PM
05/04/23 02:18 PM
|
Joined: Mar 2005
Posts: 1,553 Michigan
Kiddart
pro stock
|
pro stock
Joined: Mar 2005
Posts: 1,553
Michigan
|
you guys do great stuff, you looking to adopt a brother or a son???
I cant wait to hear how it runs.
Thank you Kiddart
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: Cab_Burge]
#3142550
05/04/23 07:05 PM
05/04/23 07:05 PM
|
Joined: Jan 2003
Posts: 10,013 Frostbitefalls MN (Rocky&Bullw...
gregsdart
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,013
Frostbitefalls MN (Rocky&Bullw...
|
I've thought about building a 4.0 stroke B/RB stroker motor but haven't built one yet ![realcrazy realcrazy](/ubbthreads/images/graemlins/custom/realcrazy.gif) , maybe next year ![luck luck](/ubbthreads/images/graemlins/custom/luck.gif) I've built more than one 3.91 stroke B and Rb motors and 4.150, 4.250, 4.320 and several 4.375 strokers with stock Mopar rod jourmnal sizes, never again using the 2.375 rod journal diameter by choice ![twocents twocents](/ubbthreads/images/graemlins/custom/twocents.gif) What made you decide to use that stroke? I'm thinking that combination will like RPM ![bow bow](/ubbthreads/images/graemlins/custom/bow.gif) i Cab, years ago i built a 475 cube rb motor out of a stock crank cut to 2.10 sbc size at 4.0 inch, using a BME 396 aluminum custom rod. It worked great for what it was. The rod was 7.10 long, which fit some stroker pistons i had from a motor that broke a crank. The 2.10 bearings held up well, and the second owner got a lot of life out of it
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: gregsdart]
#3142560
05/04/23 07:48 PM
05/04/23 07:48 PM
|
Joined: Aug 2003
Posts: 43,259 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,259
Bend,OR USA
|
I've thought about building a 4.0 stroke B/RB stroker motor but haven't built one yet ![realcrazy realcrazy](/ubbthreads/images/graemlins/custom/realcrazy.gif) , maybe next year ![luck luck](/ubbthreads/images/graemlins/custom/luck.gif) I've built more than one 3.91 stroke B and Rb motors and 4.150, 4.250, 4.320 and several 4.375 strokers with stock Mopar rod jourmnal sizes, never again using the 2.375 rod journal diameter by choice ![twocents twocents](/ubbthreads/images/graemlins/custom/twocents.gif) What made you decide to use that stroke? I'm thinking that combination will like RPM ![bow bow](/ubbthreads/images/graemlins/custom/bow.gif) i Cab, years ago i built a 475 cube rb motor out of a stock crank cut to 2.10 sbc size at 4.0 inch, using a BME 396 aluminum custom rod. It worked great for what it was. The rod was 7.10 long, which fit some stroker pistons i had from a motor that broke a crank. The 2.10 bearings held up well, and the second owner got a lot of life out of it ![work work](/ubbthreads/images/graemlins/custom/work.gif) Thanks
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Finally DONE! What will it run?!?!?
[Re: dizuster]
#3142581
05/04/23 09:22 PM
05/04/23 09:22 PM
|
Joined: Mar 2003
Posts: 6,341 Heaven
EvilB1Dart
master
|
master
Joined: Mar 2003
Posts: 6,341
Heaven
|
That's another one of the cool cars on here. I bet its going to run 9.80's.......but I think it's going to want 4.56's back there.
"Any fool can know. The point is to understand"
- A. Einstein
|
|
|
|
|