I am asking because I have an NOS set of street hemi pistons which I intend to use on a bone stock build, but I am missing the wrist pins.

I want to see if the correct sized 1.030" wrist pins are available as an off the shelf item, or if I would need to have a custom set of wrist pins ordered.

So, if you have a set of OEM street hemi pistons and pins please let me know what the wrist pin dimensions are.

Also, I am missing 2 wrist pin retaining locks for my OEM street hemi pistons ..... if anybody cares to spare a pair.....

You can find it in the service manual. 3.400" + or- .005" Length. 204 grams. 1.031-1.0312" Dia

Do you mean to post 1.031 to 1.032?

My car had a 426 "crate" ? Hemi when I bought it. I've since rebuilt it as it was a complete slug.

The old wrist pins seem to match what dragon slayer posted.

You're welcome to them if you want them (and the pistons if you want them).

That being said, my unsolicited opinion is, even on a stock rebuild I would go with a modern piston/ring pack vs NOS/ancient.

Thanks for the reply....but there is also an important dimension missing and that would be wall thickness. Hemi pistons are so heavy I guess the hemi pins will have thicker walls?

email sent!!!!!

Yes I did. Corrected post.

Wall thickness not given. But that is not critical if the pin is spec'd to a hemi. But I guess you could figure it out with density and the weight. Solve for thickness since you have the area measurements.