Whompin Wedge - Rebuilt!
#3031158
04/06/22 10:00 AM
04/06/22 10:00 AM
|
Joined: Jul 2010
Posts: 679 COLUMBUS, OH
Whompin_Wedge
OP
mopar
|
OP
mopar
Joined: Jul 2010
Posts: 679
COLUMBUS, OH
|
Hey guys,
Long time since I’ve posted much on here, but the time has come!
I’ll make this a condensed version.. but long story short.. we blew up our 557” B1 motor in July of 2020 and have been rebuilding the motor/ car ever since.
Motor: BES racing engines built 588” New kb block Tony’s port job on the b1s. Titanium valves Callie’s crank Grp rods Cp pistons Comp 55mm cam T&D paired rockers And a bunch of other parts… made 1050 on Tony’s dyno
A good friend of mine redid the 20 year old paint job and my brother and law lettered it up.
A trip to Mike Schaefers chassis shop to add bars, a chute, and completely redid the Dana 60… the car actually rolls now haha
New 727 with hardened input and output shaft and new clean neautral valve body
New Wiring, fire system, interior (minus carpet), wheels, carbon driveshaft, strange brakes… the list goes on and on.
My goal has always been to go an 8 in this car, so my dad and I decided to go all out on this build and see what we could do. Chassis is certified and we are ready to test if it ever decides to warm up and stop raining.
Hope to be posting that 8 second slip soon. Here are a few pics.
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: mopar873]
#3031176
04/06/22 10:46 AM
04/06/22 10:46 AM
|
Joined: Jan 2003
Posts: 10,022 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,022
MN
|
Looks good. Looking forward to the results.
69 GTX
68 Road Runner
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: JERICOGTX]
#3031180
04/06/22 11:01 AM
04/06/22 11:01 AM
|
Joined: Jan 2003
Posts: 4,270 Morrow, OH
markz528
master
|
master
Joined: Jan 2003
Posts: 4,270
Morrow, OH
|
Awesome! Motor sounds a lot like mine. My cast iron mega block B1MC heads made 1060 hp on Tony's dyno. What torque did it make? Have not run it yet but am close........
67 Coronet 500 9.610 @ 139.20 mph 67 Coronet 500 (street car) 14.82 @ 94 mph 69 GTX (clone) - build in progress......
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: markz528]
#3031186
04/06/22 11:14 AM
04/06/22 11:14 AM
|
Joined: Jul 2010
Posts: 679 COLUMBUS, OH
Whompin_Wedge
OP
mopar
|
OP
mopar
Joined: Jul 2010
Posts: 679
COLUMBUS, OH
|
Awesome! Motor sounds a lot like mine. My cast iron mega block B1MC heads made 1060 hp on Tony's dyno. What torque did it make? Have not run it yet but am close........ Made 820 at 6K. Would really like to build an MC motor in the future! Casey FJ
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: markz528]
#3031187
04/06/22 11:14 AM
04/06/22 11:14 AM
|
Joined: Jan 2003
Posts: 19,363 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,363
Las Vegas
|
Looks great. Cant wait to see the timeslps, give me some motivation to step up my deal.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: Whompin_Wedge]
#3031191
04/06/22 11:24 AM
04/06/22 11:24 AM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
I have watched that car run at so many out of state events over the years, and no matter what...it's always put on a great show and I have always enjoyed watching you guys race it.
Thanks for the post, it's good to know a little something behind the scenes. Looks like a first class operation.
It looks "Naked" without the lettering.
One thing that also caught my eye, the floor in that shop is the same tan color as mine. Is it rocksolid floors product?
Rich H.
Esse Quam Videri
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: justinp61]
#3031202
04/06/22 11:55 AM
04/06/22 11:55 AM
|
Joined: Sep 2009
Posts: 500 MD
JACK1440
mopar
|
mopar
Joined: Sep 2009
Posts: 500
MD
|
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: ZIPPY]
#3031207
04/06/22 12:05 PM
04/06/22 12:05 PM
|
Joined: Jul 2010
Posts: 679 COLUMBUS, OH
Whompin_Wedge
OP
mopar
|
OP
mopar
Joined: Jul 2010
Posts: 679
COLUMBUS, OH
|
I have watched that car run at so many out of state events over the years, and no matter what...it's always put on a great show and I have always enjoyed watching you guys race it.
Thanks for the post, it's good to know a little something behind the scenes. Looks like a first class operation.
It looks "Naked" without the lettering.
One thing that also caught my eye, the floor in that shop is the same tan color as mine. Is it rocksolid floors product? Thanks for the kind words Zippy! Yes, I am not a fan of the plain look on this car... Needs the lettering haha. It is indeed the Rocksolid! My only regret is not putting down more flake... Other then that the application was great. Casey FJ
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: n20mstr]
#3031292
04/06/22 03:14 PM
04/06/22 03:14 PM
|
Joined: Jan 2003
Posts: 13,363 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,363
Marion, South Carolina [><]
|
Very nice!!! Hope it runs as good as it looks!
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: Whompin_Wedge]
#3031311
04/06/22 04:16 PM
04/06/22 04:16 PM
|
Joined: Jan 2003
Posts: 16,925 NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,925
NC
|
Hey guys,
Long time since I’ve posted much on here, but the time has come!
I’ll make this a condensed version.. but long story short.. we blew up our 557” B1 motor in July of 2020 and have been rebuilding the motor/ car ever since.
Motor: BES racing engines built 588” New kb block Tony’s port job on the b1s. Titanium valves Callie’s crank Grp rods Cp pistons Comp 55mm cam T&D paired rockers And a bunch of other parts… made 1050 on Tony’s dyno What is the weight? It should make an 8-second pass easy, IMO. What did the old motor run? The new BES 588 CID looks great. Can you post a dyno sheet?
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: Leigh]
#3031336
04/06/22 05:28 PM
04/06/22 05:28 PM
|
Joined: Mar 2009
Posts: 2,463 Sydney,Australia
tex013
top fuel
|
top fuel
Joined: Mar 2009
Posts: 2,463
Sydney,Australia
|
looks great . Im sure you will hit the goal
Tex
New best ET 10.259@129.65 . New best MPH 130.32 Finally fitted a solid cam, stepped it up a bit more 3690lbs through the mufflers New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm Power by Tex's Automotive
|
|
|
Re: Whompin Wedge - Rebuilt!
[Re: dvw]
#3031378
04/06/22 07:42 PM
04/06/22 07:42 PM
|
Joined: Jul 2010
Posts: 679 COLUMBUS, OH
Whompin_Wedge
OP
mopar
|
OP
mopar
Joined: Jul 2010
Posts: 679
COLUMBUS, OH
|
I think since I'm coming to Columbus for NSS Bash. You need to make it up here for GLSSA. Congrats on the build. Doug I’d love to.. have to check their schedule.
|
|
|
|
|