CRAGAR SS WHEEL SIZE - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer CRAGAR SS WHEEL SIZE

Print Thread

Page 2 of 2

1

2

Re: CRAGAR SS WHEEL SIZE [Re: Rhinodart] #3016976 02/19/22 11:19 PM 02/19/22 11:19 PM
Joined: Apr 2005 Posts: 279 pgh pa C captaindodge enthusiast
captaindodge enthusiast C Joined: Apr 2005 Posts: 279 pgh pa	Yeah, I had a 14 inch E-T wheel with the Uni-Lugs come loose on the rear of my 69 Charger. No fault of the Uni-Lug. I was tightening with a 3/8 drive ratchet and 6 inch handle. I didn't want to over tighten with my 20 inch cross wrench !!!

Re: CRAGAR SS WHEEL SIZE [Re: captaindodge] #3016989 02/20/22 12:09 AM 02/20/22 12:09 AM
Joined: Oct 2005 Posts: 4,945 WI Dcuda69 master
Dcuda69 master Joined: Oct 2005 Posts: 4,945 WI	I ran 15" uni-lug Crager SS on my 69 B'cuda for well over 20 years BB stroker,4spd, 3:73 sure grip. Never had one come loose. To help with the OP's question....my car is a 69 FB with big bolt pattern. The Cragers I ran were 15x8 rear(4" backspace) 245/60 tires. Fronts were 15x7(3.5" backspace) 225/60 tire. Cleared fine....likely could have done a 255 tire in the rear but never tried. I run a 255 now but it's on a 15x8.5 wheel with 3.75 backspace.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1