Upper control arm needed - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Upper control arm needed

Print Thread

Upper control arm needed #300709 04/27/09 07:59 AM 04/27/09 07:59 AM
Joined: Apr 2003 Posts: 309 S.e. lower MIch.. 66droptop OP enthusiast
66droptop OP enthusiast Joined: Apr 2003 Posts: 309 S.e. lower MIch..	Changing the upper and lower control arm bushings,the driver side went fine but the pass. side was *****,While taking out the upper cab which were rusted bad we might have messed up the hole in the control arm.Does anybody know where I might be able to find a used or new upper control arm or does anyone have any ideas.....66 dodge coronet,318.Thanx.

Re: Upper control arm needed [Re: 66droptop] #300710 04/27/09 09:10 AM 04/27/09 09:10 AM
Joined: Jan 2003 Posts: 13,603 md M mopars4ever I Live Here
mopars4ever I Live Here M Joined: Jan 2003 Posts: 13,603 md	http://cgi.ebay.com/ebaymotors/Original-...sQ5fAccessories I think 66 and 68 are the same but check to make sure.

Re: Upper control arm needed [Re: mopars4ever] #300711 04/27/09 11:36 AM 04/27/09 11:36 AM
Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun nomore65BelvJim I Live Here
nomore65BelvJim I Live Here Joined: Dec 2003 Posts: 16,844 Phoenix - surface of the sun	62-72 B body UCA's are interchangeable IIRC. I have a set from a 72 Coronet on my 65 Belvedere and they are identical to the original ones.

Re: Upper control arm needed [Re: nomore65BelvJim] #300712 04/27/09 11:52 AM 04/27/09 11:52 AM
Joined: Jan 2003 Posts: 683 CENTRAL MINN 1965_PLYMOUTH mopar
1965_PLYMOUTH mopar Joined: Jan 2003 Posts: 683 CENTRAL MINN	65-72 B bodies, and all E body 70-74 are the same.

Re: Upper control arm needed [Re: 66droptop] #300713 04/27/09 01:12 PM 04/27/09 01:12 PM
Joined: Nov 2006 Posts: 3,407 S.E. Florida, USA rrunner master
rrunner master Joined: Nov 2006 Posts: 3,407 S.E. Florida, USA	I have them, PM me if interested.

Re: Upper control arm needed [Re: rrunner] #300714 04/27/09 01:17 PM 04/27/09 01:17 PM
Joined: Jan 2003 Posts: 2,530 Nunya CA CR8CRSHR master
CR8CRSHR master Joined: Jan 2003 Posts: 2,530 Nunya CA	Same here. I have a complete set of NOS UCA's if your interested. PM me for details. I can get them right out....cr8crshr/Bill

Re: Upper control arm needed [Re: CR8CRSHR] #300715 04/27/09 04:03 PM 04/27/09 04:03 PM
Joined: Apr 2003 Posts: 309 S.e. lower MIch.. 66droptop OP enthusiast
66droptop OP enthusiast Joined: Apr 2003 Posts: 309 S.e. lower MIch..	I found one locally in very clean condition for 50.00.Will be taking the bushings out later. Thanx for all the response.This is a great place.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1