Re: Post your W headed small blocks
[Re: RAY1969CARS]
#2990278
11/29/21 08:47 PM
11/29/21 08:47 PM
|
Joined: Feb 2005
Posts: 1,557 New Smyrna Beach FL
scottb
pro stock
|
pro stock
Joined: Feb 2005
Posts: 1,557
New Smyrna Beach FL
|
My old 420 cubic inch W9 motor heads were ported by modern cylinder heads heads flowed 387@750 14.5 compression 280-288 roller with 430-440 lobe Jesel rockers 1.8 intake 1.85 exhaust 420 intake ported by Ryan apd 1150 carb ran a best of 9.33 @147 with a lazy 1.42 60 ft motor differently had a 8 sec pass in it sold everything and bought a R5 P7 motor
Last edited by scottb; 11/29/21 08:49 PM.
|
|
|
Re: Post your W headed small blocks
[Re: scottb]
#2990282
11/29/21 09:05 PM
11/29/21 09:05 PM
|
Joined: Apr 2007
Posts: 1,390 CA.
RAY1969CARS
OP
pro stock
|
OP
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
|
|
|
Re: Post your W headed small blocks
[Re: MR_P_BODY]
#2990396
11/30/21 09:16 AM
11/30/21 09:16 AM
|
Joined: Aug 2003
Posts: 4,976 new jersey usa
11secdart
master
|
master
Joined: Aug 2003
Posts: 4,976
new jersey usa
|
My current 367 ... 40 over 360 Magnum block, W2 heads, 10-1 compression, Bullet cam, 249/256 , 584/595 , Victor W2 intake, 750 HP carb... has gone best of 11.09 so far only been out a few times motor going on a dyno soon for additional tuning. I have had these heads on a few different combos .. 340s and 360s ... best they ran on a 340 was 10.70s with 12 to 1 compression made 527 hp with a roller cam... with the 360 and a 590 lift mech. cam at 549 hp / 450 tq. it went 10.40 a best in my 3,150 lb Dart. I took that combo and lowered the compression for pump gas with a proper tune I am sure it will run 10.90s I run on a throttle stop to run 11.50s for index and Sportsman class racing but still want a strong combo capable of low 11s. I also have a 408... R3 block with Indy 360-1 heads that has been troublesome especially with the Indy rockers my original plan was to use W2 heads I wish I would have!
Last edited by 11secdart; 11/30/21 05:15 PM.
68 Dart 410 / 904 92 D150 original owner 21 Ram 1500 Quad Cab, Big Horn , Hemi ,4x4 23 Audi Q5 16 Honda HRV
|
|
|
Re: Post your W headed small blocks
[Re: scottb]
#2990637
11/30/21 08:44 PM
11/30/21 08:44 PM
|
Joined: Apr 2007
Posts: 1,390 CA.
RAY1969CARS
OP
pro stock
|
OP
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
|
|
|
Re: Post your W headed small blocks
[Re: RAY1969CARS]
#2990666
11/30/21 10:00 PM
11/30/21 10:00 PM
|
Joined: Jan 2003
Posts: 1,784 PA
W5DART66
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,784
PA
|
|
|
|
Re: Post your W headed small blocks
[Re: W5DART66]
#2990668
11/30/21 10:01 PM
11/30/21 10:01 PM
|
Joined: Jan 2003
Posts: 1,784 PA
W5DART66
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,784
PA
|
|
|
|
Re: Post your W headed small blocks
[Re: W5DART66]
#2990669
11/30/21 10:03 PM
11/30/21 10:03 PM
|
Joined: Jan 2003
Posts: 1,784 PA
W5DART66
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,784
PA
|
|
|
|
Re: Post your W headed small blocks
[Re: W5DART66]
#2990770
12/01/21 09:00 AM
12/01/21 09:00 AM
|
Joined: Aug 2011
Posts: 250 Saskatchewan (SK)
79410aspenrt
enthusiast
|
enthusiast
Joined: Aug 2011
Posts: 250
Saskatchewan (SK)
|
1971 340 block, 3.46'' stroke, 4.080'' bore, 11.4 compression, 264/268 @ .050 Hughes SFT, victor W2 intake, 810 W2 heads that flow 286 cfm @ 650, 1-5/8'' truck LA headers, drinks methanol.
|
|
|
Re: Post your W headed small blocks
[Re: 79410aspenrt]
#2990778
12/01/21 09:21 AM
12/01/21 09:21 AM
|
Joined: Nov 2020
Posts: 348 Isle of Sheeps
Gtxxjon
enthusiast
|
enthusiast
Joined: Nov 2020
Posts: 348
Isle of Sheeps
|
Cripes, they is small block PORN! Loving them late model heads...
Carpe diem, quam minimum credula postero, thanx Horace!
There’s no point trying to fix stuff that ain’t broke,,, 'but if ain’t broke',,, you is not trying hard enough...
|
|
|
|
|