|
Re: Modern Bullitt build
[Re: DynoDave]
#2778261
05/26/20 08:21 AM
05/26/20 08:21 AM
|
Joined: Feb 2013
Posts: 676 Maryland
Keepat
OP
mopar
|
OP
mopar
Joined: Feb 2013
Posts: 676
Maryland
|
So much cool stuff!
But I think I like the thick blocks of foam for laying on the best! Back and knees saver;-)
|
|
|
Re: Modern Bullitt build
[Re: Keepat]
#2785897
06/15/20 11:34 PM
06/15/20 11:34 PM
|
Joined: Dec 2007
Posts: 18,157 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,157
Mass
|
I Installed the passenger side rear window and trim. The AMD quarter glass was a heavy 1/16” taller on the rear 12 inches compared to the original. So I had to sand it down with a DA sander to get the best fit. All of the AMD glass has a rough finish on edge so I use the DA sander starting with 60 grit and working my way to 180 to polished edges that show Your a brave man! last time I was "polishing" the edge of tempered side glass with a DA, it was going great one moment, then the next the glass just sort of disappeared from my hand! got a little "gun shy" after that..Lol!...great work as always! Mike
|
|
|
Re: Modern Bullitt build
[Re: DAYCLONA]
#2787178
06/19/20 05:10 PM
06/19/20 05:10 PM
|
Joined: Feb 2013
Posts: 676 Maryland
Keepat
OP
mopar
|
OP
mopar
Joined: Feb 2013
Posts: 676
Maryland
|
I Installed the passenger side rear window and trim. The AMD quarter glass was a heavy 1/16” taller on the rear 12 inches compared to the original. So I had to sand it down with a DA sander to get the best fit. All of the AMD glass has a rough finish on edge so I use the DA sander starting with 60 grit and working my way to 180 to polished edges that show Your a brave man! last time I was "polishing" the edge of tempered side glass with a DA, it was going great one moment, then the next the glass just sort of disappeared from my hand! got a little "gun shy" after that..Lol!...great work as always! Mike Mike, Working with tempered glass is never fun, but as long as you do not let the glass get hot it can work. I would only sand the edge of the glass for about 30 seconds then stopping to let it cool. Thank you! Pat
|
|
|
Re: Modern Bullitt build
[Re: Keepat]
#2795666
07/12/20 12:26 AM
07/12/20 12:26 AM
|
Joined: Jul 2009
Posts: 1,066 Newton, KS
70B5Cuda
super stock
|
super stock
Joined: Jul 2009
Posts: 1,066
Newton, KS
|
WOW....that's all I've got. Can't wait to see pics of it on the street
1970 Barracuda B5 6.1 Hemi/6 speed 1969 Charger survivor in R6 383/727-wrecked 12/24/18 1968 Charger in original burgundy paint "Ribeye" 1968 Charger w/ 6.1L, TR-6060, 9" 1968 Roadrunner w/ 6.1L/6 speed 2011 Dodge Ram w/ 6.7L
|
|
|
Re: Modern Bullitt build
[Re: UCUDANT]
#2796553
07/14/20 02:41 PM
07/14/20 02:41 PM
|
Joined: Dec 2013
Posts: 4,674 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,674
Wichita
|
TOO PERFECT!
I would be afraid to drive it!
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Modern Bullitt build
[Re: 70B5Cuda]
#2798300
07/18/20 01:05 PM
07/18/20 01:05 PM
|
Joined: Feb 2013
Posts: 676 Maryland
Keepat
OP
mopar
|
OP
mopar
Joined: Feb 2013
Posts: 676
Maryland
|
WOW....that's all I've got. Can't wait to see pics of it on the street Me too! Thanks!
|
|
|
Re: Modern Bullitt build
[Re: GY3]
#2798302
07/18/20 01:07 PM
07/18/20 01:07 PM
|
Joined: Feb 2013
Posts: 676 Maryland
Keepat
OP
mopar
|
OP
mopar
Joined: Feb 2013
Posts: 676
Maryland
|
TOO PERFECT!
I would be afraid to drive it! I’ll drive it! Thanks! Pat
|
|
|
|
|
|