solid flat tappet lifter ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech solid flat tappet lifter ?

Print Thread

solid flat tappet lifter ? #276823 04/04/09 04:23 PM 04/04/09 04:23 PM
Joined: Jul 2007 Posts: 189 Newark, OH springers340dart OP member
springers340dart OP member Joined: Jul 2007 Posts: 189 Newark, OH	i'm puttin in a solid flat tappet thats been used once before but i was inspectin the lifters and you can see the pattern on the bottom but i saw a very small chip on the corner between the side of the lifter and the bottom lift surface, will this hurt anything? should i get another set of lifters? Last edited by springers340dart; 04/04/09 05:05 PM.

Re: solid flat tappet lifter ? [Re: springers340dart] #276824 04/04/09 06:42 PM 04/04/09 06:42 PM
Joined: Apr 2007 Posts: 2,327 Glendale, AZ 6 69L78Nova Banned. Forever.
69L78Nova Banned. Forever. 6 Joined: Apr 2007 Posts: 2,327 Glendale, AZ	Quote: should i get another set of lifters? I would. Then break in as a new cam 1969 Nova 454/M21/3.31 Mild mid-11 second weekend cruiser 1994 F150 XLT Super Cab 2WD 5.0/4R70W/3.55 (Daily driver)

Re: solid flat tappet lifter ? [Re: 69L78Nova] #276825 04/04/09 07:31 PM 04/04/09 07:31 PM
Joined: Aug 2003 Posts: 3,095 Idaho Runner master
Runner master Joined: Aug 2003 Posts: 3,095 Idaho	be a good excuse to step up to edm lifters

Re: solid flat tappet lifter ? [Re: Runner] #276826 04/04/09 09:13 PM 04/04/09 09:13 PM
Joined: Aug 2003 Posts: 8,716 Baltimore/Denver 64Post master
64Post master Joined: Aug 2003 Posts: 8,716 Baltimore/Denver	Quote: be a good excuse to step up to edm lifters I have an extra set if you're interested...

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1