Used Converter - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Used Converter

Print Thread

Used Converter #2760867 04/06/20 07:14 PM 04/06/20 07:14 PM
Joined: Jul 2008 Posts: 53 Sullivan, IN M Mopar Sam OP member
Mopar Sam OP member M Joined: Jul 2008 Posts: 53 Sullivan, IN	My son got a used 10" converter and I noticed the inner splined section will move easily both directions. Clockwise and counter clockwise. All of the other converters I have in the shop, including an 8" will only go one direction easily. Is his converter junk? Last edited by Mopar Sam; 04/06/20 07:16 PM.

Re: Used Converter [Re: Mopar Sam] #2760882 04/06/20 08:12 PM 04/06/20 08:12 PM
Joined: Mar 2011 Posts: 3,076 Michigan A A727Tflite master
A727Tflite master A Joined: Mar 2011 Posts: 3,076 Michigan	Originally Posted by Mopar Sam My son got a used 10" converter and I noticed the inner splined section will move easily both directions. Clockwise and counter clockwise. All of the other converters I have in the shop, including an 8" will only go one direction easily. Is his converter junk? Not the correct way to test the converter stator. You need to hold the stator then see if the stator race (splined portion) locks one way and freewheels the other. Last edited by Transman; 04/06/20 08:13 PM.

Re: Used Converter [Re: A727Tflite] #2760885 04/06/20 08:26 PM 04/06/20 08:26 PM
Joined: Jul 2008 Posts: 53 Sullivan, IN M Mopar Sam OP member
Mopar Sam OP member M Joined: Jul 2008 Posts: 53 Sullivan, IN	Ok Thanks. I will look at it tomorrow.

Re: Used Converter [Re: Mopar Sam] #2761155 04/07/20 03:47 PM 04/07/20 03:47 PM
Joined: Jul 2008 Posts: 53 Sullivan, IN M Mopar Sam OP member
Mopar Sam OP member M Joined: Jul 2008 Posts: 53 Sullivan, IN	Well, I think it is good.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1