Re: A/T yoke length
[Re: crash520]
#2719290
11/25/19 08:09 PM
11/25/19 08:09 PM
|
Joined: Nov 2003
Posts: 36,040 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
Question is, is there different length yokes??? Can I get a long yoke for my 727?? Yes. I had that same issue &I kept the yoke (904) with a slightly longer shaft & it took care of it (part time vibration at various speeds, mostly decel iirc).
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: A/T yoke length
[Re: RapidRobert]
#2719299
11/25/19 08:37 PM
11/25/19 08:37 PM
|
Joined: Oct 2013
Posts: 247 Brisbane Australia
crash520
OP
enthusiast
|
OP
enthusiast
Joined: Oct 2013
Posts: 247
Brisbane Australia
|
Question is, is there different length yokes??? Can I get a long yoke for my 727?? Yes. I had that same issue &I kept the yoke (904) with a slightly longer shaft & it took care of it (part time vibration at various speeds, mostly decel iirc). Interesting for sure Rob
|
|
|
Re: A/T yoke length
[Re: crash520]
#2719368
11/26/19 03:03 AM
11/26/19 03:03 AM
|
Joined: Aug 2003
Posts: 43,157 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,157
Bend,OR USA
|
I wouldn't try it on a lift that lets the suspension hang down, you want the weight on the suspension just like it would have sitting on the tires on the road. In other words have the weight loading the chassis with the rear wheels off the ground so you can simulate the tires and drive train spinning like you drive it without the front tires spinning eliminating those two from the trouble shooting chain. I hope that makes since
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: A/T yoke length
[Re: Clanton]
#2719498
11/26/19 03:46 PM
11/26/19 03:46 PM
|
Joined: Oct 2013
Posts: 247 Brisbane Australia
crash520
OP
enthusiast
|
OP
enthusiast
Joined: Oct 2013
Posts: 247
Brisbane Australia
|
I think the runout on the yoke is .050 at the caps and this will tell you a lot on the fit of it to the output shaft. Clanton, are you saying that the spec and it shouldn’t be more than that? Pretty sure I have more
|
|
|
Re: A/T yoke length
[Re: crash520]
#2719502
11/26/19 03:57 PM
11/26/19 03:57 PM
|
Joined: May 2011
Posts: 4,489 northern,Ohio,USA
Clanton
master
|
master
Joined: May 2011
Posts: 4,489
northern,Ohio,USA
|
Correct.That is not exact but maybe transman or dr.diff will chime in.The more ingagement on the spline with output and yoke the less it will be.I had 3.5" to 4" on mine spicer 1350 I think the runout on the yoke is .050 at the caps and this will tell you a lot on the fit of it to the output shaft. Clanton, are you saying that the spec and it shouldn’t be more than that? Pretty sure I have more
Last edited by Clanton; 11/26/19 03:59 PM.
|
|
|
|
|