Anyone have any firsthand experience with a ClutchTamer on their street strip car? If so, before and after 60', and ET times and what's your impression?

TIA...

Buy a better clutch.

I have one that I bought because it should be a lot easier to adjust for Street vs. strip compared to my soft lock. But I haven't installed it yet. I had a long conversation with a guy who had run one for enuff years to have it sorted out. He said to use a sintered iron disc, it is the only one that will slip enuff to be effective.

Here's a before video, best results were setting it off at 3500, 11.59@120 w/ a 1.88 60'...

BEFORE

Here's the after, able to launch at 6800, 11.26@120 w/ 1.509, basically shaved .37 off their 60' with very little time spent dialing it in.

AFTER

Be sure to read the comments below the videos.


Grant