|
Re: 413 valve size
[Re: als499]
#2624713
02/22/19 02:41 PM
02/22/19 02:41 PM
|
Joined: Jan 2003
Posts: 14,498 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,498
So. Burlington, Vt.
|
I’d expect some problems with the ex valve if you run much over .500 lift.
Not sure on the intakes.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: 413 valve size
[Re: als499]
#2624886
02/22/19 09:28 PM
02/22/19 09:28 PM
|
Joined: Jan 2003
Posts: 14,498 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,498
So. Burlington, Vt.
|
1.81’s touch the bores on a std bore 383 at about .550 lift...... and since the 413’s bore is .125” smaller...... I think it’ll touch with less lift.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
|
|
|