Re: 67-72 A Body LCA sway bar tabs
[Re: cdstl]
#2617398
02/05/19 05:48 PM
02/05/19 05:48 PM
|
Joined: Sep 2007
Posts: 14,889 up yours
Supercuda
About to go away
|
About to go away
Joined: Sep 2007
Posts: 14,889
up yours
|
I know you can buy them, optionally, from Firm Feel when you buy the front sway bar kit, but I don't know if they sell them separate, an email might work.
Last edited by Supercuda; 02/05/19 05:49 PM. Reason: clarification
They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.
|
|
|
Re: 67-72 A Body LCA sway bar tabs
[Re: AndyF]
#2617487
02/05/19 09:42 PM
02/05/19 09:42 PM
|
Joined: Sep 2011
Posts: 1,487 STL
cdstl
OP
pro stock
|
OP
pro stock
Joined: Sep 2011
Posts: 1,487
STL
|
I don't think anyone makes a correct looking reproduction weld on bracket. Hotchkis makes a nice weld on bracket while several other places provide a bolt on tab or a simple L shaped bracket. I looked into all of this a few weeks back and then decided to just buy some A body arms with the correct tabs on them. I agree but they are not easy to find. I have Jim (Rhinodart) looking in his stash. It's for a buddy and he only needs the Driver side. It's for a hot rod 71 Demon, so correctness is not a real necessity. The Bergman and Hotchkis B body look to be the same. Even the pictures are the same. Thanks
1972 Cuda 340 4 speed, 2001 Ram CTD 4x4 6 speed, 1970 Duster 408 4 speed, 1996 Ram 5.9 2x4 auto, 1965 Coronet 500
|
|
|
|
|