Ritter Blocks - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Ritter Blocks

Print Thread

Page 4 of 4

1

2

3

4

Re: Ritter Blocks [Re: Biginchmopar] #2520870 07/12/18 02:19 AM 07/12/18 02:19 AM
Joined: Feb 2013 Posts: 99 Nampa, Idaho M Moparmatts72 member
Moparmatts72 member M Joined: Feb 2013 Posts: 99 Nampa, Idaho	Yeah there have been issues that were addressed, molds revised and new casts. My only issue was I ordered 340 main and Hughes site says all blocks take a 360 pan, well if you order 340 main you get a rear pan seal cut for a 340 pan. Had to have mine recut, no charge just shipping.

Re: Ritter Blocks [Re: Moparmatts72] #2520901 07/12/18 06:44 AM 07/12/18 06:44 AM
Joined: Jan 2003 Posts: 6,136 Melbourne , Australia LA360 master
LA360 master Joined: Jan 2003 Posts: 6,136 Melbourne , Australia	Most R3 blocks were for a 360 oil pan, regardless of the main size. Which is why I believe the Ritter blocks are like this. Did they make you a new rear main cap to suit the 340 oil pan? Alan Jones

Re: Ritter Blocks [Re: Biginchmopar] #2520948 07/12/18 10:51 AM 07/12/18 10:51 AM
Joined: Feb 2013 Posts: 99 Nampa, Idaho M Moparmatts72 member
Moparmatts72 member M Joined: Feb 2013 Posts: 99 Nampa, Idaho	They did the opposite due to I bought a 360 pan, so they cut down the rear cap for a 360 pan seal.

Page 4 of 4

1

2

3

4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1