Converter diameter - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Converter diameter

Print Thread

Converter diameter #2514191 06/27/18 11:30 PM 06/27/18 11:30 PM
Joined: Jan 2014 Posts: 23 TN RRandP92 OP member
RRandP92 OP member Joined: Jan 2014 Posts: 23 TN	I have a unknown converter that measures 10.5" in overall diameter. Could this be a 9 or 9.5" converter? The known 8" is 9.5" overall diameter. Maybe no way to confirm unless cut open?

Re: Converter diameter [Re: RRandP92] #2514194 06/27/18 11:34 PM 06/27/18 11:34 PM
Joined: Jan 2003 Posts: 14,499 So. Burlington, Vt. F fast68plymouth I Live Here
fast68plymouth I Live Here F Joined: Jan 2003 Posts: 14,499 So. Burlington, Vt.	10.5 OD should be a 9.5” or 10” unit. 68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads

Re: Converter diameter [Re: RRandP92] #2514286 06/28/18 07:47 AM 06/28/18 07:47 AM
Joined: Jan 2003 Posts: 17,918 Akron, Ohio ProSport I Live Here
ProSport I Live Here Joined: Jan 2003 Posts: 17,918 Akron, Ohio	Is there a serial number on it? That might help. 1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual

Re: Converter diameter [Re: ProSport] #2514577 06/28/18 07:27 PM 06/28/18 07:27 PM
Joined: Jan 2014 Posts: 23 TN RRandP92 OP member
RRandP92 OP member Joined: Jan 2014 Posts: 23 TN	There are couple numbers stamped on it 10490R, 7174, 1420.

Re: Converter diameter [Re: RRandP92] #2514588 06/28/18 07:58 PM 06/28/18 07:58 PM
Joined: Jan 2003 Posts: 25,817 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,817 Rio Linda, CA	From my personal experience, some converter maker's diameter claims and any semblance to a tape measure are a total mystery. The INTERNET, the MISinformation superhighway

Re: Converter diameter [Re: John_Kunkel] #2514966 06/29/18 04:19 PM 06/29/18 04:19 PM
Joined: Jan 2014 Posts: 23 TN RRandP92 OP member
RRandP92 OP member Joined: Jan 2014 Posts: 23 TN	Never paid much attention to it until this one that I didn't have labeled. I sent the 8" off to be redone but am now questioning what this other unit that measures 10.5" actually is. Guess ill be getting it cut open!

Re: Converter diameter [Re: John_Kunkel] #2514987 06/29/18 04:52 PM 06/29/18 04:52 PM
Joined: Nov 2004 Posts: 7,274 s.w.fl B bonefish master
bonefish master B Joined: Nov 2004 Posts: 7,274 s.w.fl	Originally Posted By John_Kunkel From my personal experience, some converter maker's diameter claims and any semblance to a tape measure are a total mystery.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1