Anybody use this camshaft. - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Anybody use this camshaft.

Print Thread

Anybody use this camshaft. #243416 03/04/09 09:31 PM 03/04/09 09:31 PM
Joined: Sep 2005 Posts: 73 Paxton,IL B bullet440 OP member
bullet440 OP member B Joined: Sep 2005 Posts: 73 Paxton,IL	I have a crane cams 689356 small hydraulic roller for a big block but I have no cam card and they are a little hard to get a hold of these days any info om cam would be great thanks..

Re: Anybody use this camshaft. [Re: bullet440] #243417 03/06/09 12:57 PM 03/06/09 12:57 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Are you sure on the number? hears all I can find http://cranecams.com/index.php?show=brow...=383-440%20C.I. 689501 HR-204/286-2-12 HYDRAULIC ROLLER SPECIAL 1970-1978 PLYMOUTH-DODGE-CHRYSLER "B" V-8 383 THRU 440 CU.IN. (THREE BOLT GEAR) 689511 HR-214/325-2S-12 HYDRAULIC ROLLER SPECIAL 1970-1978 PLYMOUTH-DODGE-CHRYSLER "B" V-8 383 THRU 440 CU.IN. (THREE BOLT GEAR) 689521 HR-222/339-2S-12 HYDRAULIC ROLLER SPECIAL 1970-1978 PLYMOUTH-DODGE-CHRYSLER "B" V-8 383 THRU 440 CU.IN. (THREE BOLT GEAR) 689531 HR-230/352-2S-12 HYDRAULIC ROLLER SPECIAL 1970-1978 PLYMOUTH-DODGE-CHRYSLER "B" V-8 383 THRU 440 CU.IN. (THREE BOLT GEAR) 689541 HR-240/365-2S-14 HYDRAULIC ROLLER SPECIAL 1970-1978 PLYMOUTH-DODGE-CHRYSLER "B" V-8 383 THRU 440 CU.IN. (THREE BOLT GEAR)

Re: Anybody use this camshaft. [Re: Dodgem] #243418 03/06/09 01:05 PM 03/06/09 01:05 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	You can put it in the block with a degree wheel and dial indicator and map it all out

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1