|
Re: KB blocks
[Re: Biginchmopar]
#2358338
08/22/17 10:30 PM
08/22/17 10:30 PM
|
Joined: Feb 2005
Posts: 20,203 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,203
PA.
|
I made a mistake and didn't order my Keith Black RB block for pushrod oiling so I had a local shop (Tom Hemphill) drill it for me so I could run both my 440-1 heads and B1 heads.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: KB blocks
[Re: camastomcat]
#2359290
08/24/17 08:06 PM
08/24/17 08:06 PM
|
Joined: Nov 2010
Posts: 1,397 Carson City, Nevada
Biginchmopar
pro stock
|
pro stock
Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
|
Depends on common shaft rockers or paired rockers. I would never run spray bars with single shaft rockers. The only way to fix it with single shafts is to drill the oil passage in the block from the cam to the heads.
|
|
|
Re: KB blocks
[Re: perfmachst]
#2361005
08/28/17 04:56 AM
08/28/17 04:56 AM
|
Joined: Jan 2003
Posts: 2,933 Finalnd, Perkele
jyrki
master
|
master
Joined: Jan 2003
Posts: 2,933
Finalnd, Perkele
|
OR you can make individual lines to every lifter bore, which is propably easier and less expensive and can even be done at home.
Plynouth VIP '67 TT IC EFI
|
|
|
|
|
|