Page 2 of 2 < 1 2
Topic Options
#2366870 - 09/07/17 09:36 AM Re: Anyone running Koni shocks? [Re: AndyF]
badeeds Offline
member

Registered: 04/28/08
Posts: 24
Loc: McKinney, TX
Nice clean slick work AndyF. A lot of your stuff over the years have been my inspiration.

Top
#2390012 - 10/19/17 06:54 PM Re: Anyone running Koni shocks? [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23933
Loc: Oregon
I designed a different style of shock plate for my Duster project and now I'm thinking I'll switch to this style on my Coronet also. The double shear design is stronger and easier to R&R. It is also a more flexible design which allows me to place the lower mount exactly where I want it before I weld the assembly together.


Attachments
DSC_1546 (Large).JPG

DSC_1547 (Large).JPG



Top
#2399163 - 11/05/17 10:50 PM Re: Anyone running Koni shocks? [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23933
Loc: Oregon
Got the Coronet running again after sitting in the back of the shop for 10+ years. Might get it out to a track day next summer. Doubt I'll drive it very hard but might take it out for a few laps.

https://www.youtube.com/watch?v=zvGBDgF6sZk&feature=youtu.be

Top
#2399164 - 11/05/17 10:55 PM Re: Anyone running Koni shocks? [Re: AndyF]
NV69B7RR Offline
master

Registered: 11/08/06
Posts: 5841
Loc: Reno, Nevada
Cool video, thanks for sharing!! Coronet sounds good.
_________________________
68 AMX track car
72 Demon 340
71 Duster 340 Resto http://board.moparts.org/ubbthreads/show...part=1&vc=1

Top
#2399967 - 11/07/17 12:11 PM Re: Anyone running Koni shocks? [Re: AndyF]
73MagDuster Offline
member

Registered: 10/15/07
Posts: 162
Loc: Hershey, PA
Andy, how much for a pair of those rear shock plates?

Top
#2401260 - 11/10/17 12:13 AM Re: Anyone running Koni shocks? [Re: 73MagDuster]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23933
Loc: Oregon
Originally Posted By 73MagDuster
Andy, how much for a pair of those rear shock plates?


Depends on which ones you are asking about. The ones one the Coronet are fairly simple so they'll be around $90 from Mancini. The ones on the Duster will be a u-weld it kit and might be $120 or so. The Duster ones will have the extra plates for the CalTrac bars.

Top
#2407325 - 11/22/17 10:01 AM Re: Anyone running Koni shocks? [Re: AndyF]
roadracecuda Offline
member

Registered: 10/28/05
Posts: 14
Loc: St. Charles, IL
Andy- great work as always. What hub/disc are you using on the front?
_________________________
1967 Barracuda Fastback Vintage Road Racer
1971 Scamp
2015 Challenger
1998 Ram 2500 CTD

Top
#2407854 - 11/23/17 11:13 AM Re: Anyone running Koni shocks? [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23933
Loc: Oregon
Custom hubs with Baer rotors and Porsche calipers.

Top
#2495521 - 05/13/18 12:15 PM Re: Anyone running Koni shocks? [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23933
Loc: Oregon
I did get the Coronet out for some driving the other day. The Koni shocks make a big difference in how the car feels. The car was really harsh with the old shocks that I had on there but now with the Koni shocks it just soaks up the bumps. I have 0.960 torsion bars up front but I think I can step up a notch to the 1.00 inch bars without any issues.


Attachments
DSC_2394 (Large).jpeg



Top
#2495961 - 05/14/18 11:58 AM Re: Anyone running Koni shocks? [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23933
Loc: Oregon
The adjusters are screwed in flush with the LCA plates with the 0.960 bars so it wouldn't hurt me to go one step larger to a 1.00 bar. That would give me a few more threads of adjustment.

I weighed the Coronet and it is 3800 lbs without driver. 50/50 weight distribution. So that is 1900 lbs on the front end which means a 190 lb/inch front spring rate would work.

I haven't tried different settings on the Koni shocks yet. I installed them with the adjustment in the middle of the range and they seem to be working fine so I'll probably leave it for now.

Top
#2496555 - 05/15/18 03:57 PM Re: Anyone running Koni shocks? [Re: AndyF]
BigBlockMopar Offline
master

Registered: 01/22/03
Posts: 3232
Loc: The Netherlands
Within 2 or 3 days I had the adjustable shocks on my Dart fairly set up to my liking.
Hotchkis front / QA1 rear, 1" torsionbars, Hellwig front swaybar, 7 leaf springpacks in the back (because of 2 propane tanks).

The car felt like sticking to the road much better than ever before.
_________________________
BigBlockMopar.com


Top
Page 2 of 2 < 1 2

Advertisement
Sponsored Link
Forum Stats
25,298 Registered Members
32 Forums
189,451 Topics
2,209,255 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Boom! Wall meet Danika...
by rrbrucea
05/27/18 01:30 PM
Electric fan placement for max cooling?
by Digger73
05/27/18 12:38 PM
Screws for Finish Panel
by b body idiot
05/27/18 11:48 AM
What type of anodizing is on '69 Charger rocker moldings?
by Dixie
05/27/18 10:25 AM