Wondering if anyone has any specific measurements or details of the rear decklid/side decal for a 69' Dart Swinger? I've seen so many in slightly different positioning, just want it right. Thank you.

You must be talking about the DART SWINGER stripe right? I do have the factory dimensions somewhere, but won't be able to located them right now. Basically just center the stripe with the reflectors and the bottom of the top pinstripe right at the center body line.

Thanks. Yeah the center body line mark was where I was most curious.

Make sure to tape it on all the way around and see where the edges of the stripes lay. There are a vendor or two who had cut the stripes a bit too short and barely layed over the edge of the trunk lip and trunk channel.

Perfect. Thank you.

The set I have, have about 1" extra on decklid end, and just reach under quarter in bottom side. Thanks.

You will notice that the decal was 3" from the metal seem on he underside of the deck lid on each side. Note how it terminates at th bottom

This will show how much decal wrapped around into the trunk well