383/400 Main Bearings? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 383/400 Main Bearings?

Print Thread

383/400 Main Bearings? #2253778 02/14/17 11:33 PM 02/14/17 11:33 PM
Joined: Jan 2003 Posts: 1,807 Mopar Country, Mi ccdave OP The Ultimate
ccdave OP The Ultimate Joined: Jan 2003 Posts: 1,807 Mopar Country, Mi	Is there a bearing manufacturer out there that makes 361/383/400 main bearings with the 74-79 larger flange on the #3 thrust bearing?

Re: 383/400 Main Bearings? [Re: ccdave] #2253797 02/14/17 11:55 PM 02/14/17 11:55 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	I typed in "400 mopar main bearings" on eBay & got some that might be the large thrust ones. live every 24 hour block of time like it's your last day on earth

Re: 383/400 Main Bearings? [Re: ccdave] #2253800 02/15/17 12:00 AM 02/15/17 12:00 AM
Joined: Aug 2003 Posts: 43,190 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,190 Bend,OR USA	I've used several, more than five sets, of the Federal Mogul, Seal Power # M4094 full narrow groove main bearing sets in both pre 1973 400 blocks as well as in the later1976, 1979 400 blocks with no issues on them fitting and working Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: 383/400 Main Bearings? [Re: Cab_Burge] #2253836 02/15/17 12:43 AM 02/15/17 12:43 AM
Joined: Jan 2003 Posts: 1,807 Mopar Country, Mi ccdave OP The Ultimate
ccdave OP The Ultimate Joined: Jan 2003 Posts: 1,807 Mopar Country, Mi	Originally Posted By Cab_Burge I've used several, more than five sets, of the Federal Mogul, Seal Power # M4094 full narrow groove main bearing sets in both pre 1973 400 blocks as well as in the later1976, 1979 400 blocks with no issues on them fitting and working I just want the large thrust. Not worried at all about fit whatsoever.

Re: 383/400 Main Bearings? [Re: ccdave] #2254164 02/15/17 07:17 PM 02/15/17 07:17 PM
Joined: Jan 2003 Posts: 25,808 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,808 Rio Linda, CA	It appears that most (all) of the bearing makers are only supplying the small flange center main bearing. Might find some old stock with the large flange. The INTERNET, the MISinformation superhighway

Re: 383/400 Main Bearings? [Re: John_Kunkel] #2254383 02/16/17 01:02 AM 02/16/17 01:02 AM
Joined: Oct 2011 Posts: 515 geezer acres rest home D dakotawilly mopar
dakotawilly mopar D Joined: Oct 2011 Posts: 515 geezer acres rest home	King engine bearing specialists has a big selection of high quality bearings SFI 25.5 depends,no leak,even at 213 mph....

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1