I found a 72 cuda with a July 72 SPD that supposedly has "Y9#" on the bc sheet. Galen's book says it's "Show car finish". I'm a little lost on why the "#" symbol would be used instead of a number. My info is from a typed up decode that GG did and I have not seen the actual sheet. His info on the decode says "Show car finish # ?" Anyone else ever see this? Thanks.

Got a photo?

can't account for 1972 but here's what I've got for 1971:

Y91 69-71 Show Car finish A/Less gas
Y92 69-70 Show Car Finish B/Less gas
Y93 71 Show car Finish B/ less gas
Y97 70 Show car Finish 3 gallons gas

That's all i got and I can't explain that.

It might mean that the number was unreadable by GG - I would post a pic of it here as some of our members are

Photo of the original?

If it was a typo on the original & then used in a decoder book that would be a bit funny.

3 & # are the same keyboard key if the caps button was bumped.

As I said, I have not seen the sheet. I thought typo, too, but "Y9#" is in his 72-4 white book and simply says "Show car finish". Y93 is Show car finish B/ Less gas.

Good guess.

Y9# Show Car Finish #?

GG put a ? after the # in his decode report meaning the 3rd digit is unreadable

I'm betting Barry is correct - the sheet has "#" (shift 3) - the code in question should be Y93 - which is still "show car finish B/less gas" in '72

I'd also bet the decode by Galen predates the code book you are using for reference & the fact that Galen saw a sheet with "Y9#" lead GG to add that code to the following editions of the '72-'74 book

Ah yes...now that I'm fresh from a nap, it makes sense that the "#" is a typo on the sheet itself.

Now that that's "clear", what exactly is a "Show car finish"???

Or the # merely means any one of several digits that could be the second digit in the code.

Other broadcast sheet typos can be seen at http://www.hamtramck-historical.com/factoryErrors.shtml

The question remains, if it's an error, is the error Galen's or the factory?

Well, if the original BC says Y9# then I would guess that whatever happened started at the factory.

Beuller? Beuller?

At this point, nobody gives a crap about the typo.

What the what is "Show Car Finish"?????????

If a factory description of it exists, I have not seen yet.

Possibly buffed?

I had a '74 Cuda 360 that had "S/Car Finish" with a # in the box. Can't find the title at the moment.

The plot thickens!

I got a pretty decent description of "Show car finish" from my friend at FIA. I'll try to remember to post it here later. (No access to the info here)

Guess here: Show car finish for a car that was not being delivered to a dealer (where it would be prepped for delivery). The car would be gone over at the plant to check fit and finish, cleaning, and fluids fills. These, the types of things a dealer ordinarily preforms.

I for one would be interested in knowing this. Especially the difference between the show car A and B finishes and why they would put less gas for some and add 3 gallons gas for others.