Re: Need dependable roller lifters
[Re: sc301v]
#222119
02/12/09 01:22 PM
02/12/09 01:22 PM
|
Joined: Jan 2003
Posts: 31,022 Oregon
AndyF
I Win
|
I Win
Joined: Jan 2003
Posts: 31,022
Oregon
|
Call the guys at Best Machine. They have a private brand roller lifter that will do exactly what you need.
I'm not sure why they don't advertise these lifters but they have them.
Last edited by AndyF; 02/12/09 01:22 PM.
|
|
|
Re: Need dependable roller lifters
[Re: sc301v]
#222120
02/12/09 01:32 PM
02/12/09 01:32 PM
|
Joined: Nov 2003
Posts: 10,384 Upstate NY
Bigcube
I Live Here
|
I Live Here
Joined: Nov 2003
Posts: 10,384
Upstate NY
|
Look into Isky red zone lifters. I got them from Scott Brown. They are offset on the intake with pushrod oiling and my block (KB) is not bushed. I run some healthy spring pressures but I don't recall the exact numbers.
Jim
|
|
|
Re: Need dependable roller lifters
[Re: boatracer572]
#222126
02/12/09 06:04 PM
02/12/09 06:04 PM
|
Joined: Feb 2008
Posts: 364 Kentucky
sc301v
OP
enthusiast
|
OP
enthusiast
Joined: Feb 2008
Posts: 364
Kentucky
|
Quote:
Comp 892 lifters for pushrod oiling I run valve spring pressures at: 450lbs closed,1280lbs open! ive been running them for years at 8400 rpms.and rotate them out at 150 passes,Never broke one!!!
Are those a full bodied lifter or do they have the cutout.
I found some 829s but couldnt find the 892s
|
|
|
Re: Need dependable roller lifters
[Re: sc301v]
#222127
02/12/09 06:44 PM
02/12/09 06:44 PM
|
Joined: Jan 2003
Posts: 31,022 Oregon
AndyF
I Win
|
I Win
Joined: Jan 2003
Posts: 31,022
Oregon
|
Quote:
Anybody got any part #s for any of these lifters. The websites arent showing much on the mopars.Not that i can see anyway. Thanks again
Call Best Machine.
|
|
|
Re: Need dependable roller lifters
[Re: sc301v]
#222129
02/12/09 06:52 PM
02/12/09 06:52 PM
|
Joined: Dec 2008
Posts: 136 CHANDLER, AZ
512 VALIANT
member
|
member
Joined: Dec 2008
Posts: 136
CHANDLER, AZ
|
Quote:
Anybody got any part #s for any of these lifters. The websites arent showing much on the mopars.Not that i can see anyway. Thanks again
ISKY RED ZONE PART# 3472RH
|
|
|
Re: Need dependable roller lifters
[Re: Cab_Burge]
#222130
02/12/09 07:42 PM
02/12/09 07:42 PM
|
Joined: Oct 2004
Posts: 8,165 Left Coast
BobR
master
|
master
Joined: Oct 2004
Posts: 8,165
Left Coast
|
Quote:
Crane Ultra or Jesels
I agree. Anything else is a crap shoot for serious applications.
|
|
|
Re: Need dependable roller lifters
[Re: Diablo]
#222134
02/13/09 09:41 AM
02/13/09 09:41 AM
|
Joined: Feb 2008
Posts: 364 Kentucky
sc301v
OP
enthusiast
|
OP
enthusiast
Joined: Feb 2008
Posts: 364
Kentucky
|
Quote:
I've just bought a set of Crane .210 offset, pushrod oiling. im lifting close to an inch in my 600++ci engine
Dont guess you have a part# would you.
And also do you run them in an unbushed block.
|
|
|
Re: Need dependable roller lifters
[Re: Brian Hafliger]
#222136
02/13/09 10:51 AM
02/13/09 10:51 AM
|
Joined: Oct 2004
Posts: 8,165 Left Coast
BobR
master
|
master
Joined: Oct 2004
Posts: 8,165
Left Coast
|
Quote:
I sell these: Pushrod oil, edm oil to the bearings, moved oil hole, shrouded wheel, available with no offset or .180 offsets. Brian
Probably need to have the bores bushed to get any kind of decent oil pressure.
|
|
|
Re: Need dependable roller lifters
[Re: BobR]
#222137
02/13/09 11:26 AM
02/13/09 11:26 AM
|
Joined: Jan 2003
Posts: 5,484 SoCal
Brian Hafliger
master
|
master
Joined: Jan 2003
Posts: 5,484
SoCal
|
Quote:
Quote:
I sell these: Pushrod oil, edm oil to the bearings, moved oil hole, shrouded wheel, available with no offset or .180 offsets. Brian
Probably need to have the bores bushed to get any kind of decent oil pressure.
Where do you guys come up with this stuff??????????????????????????????????????????????????????????????????????????????? These lifters go right in, no problem, no bushing. Infact these lifters are made so you can run quite a bit of lift WITHOUT bushing the block!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ask some board members who have bought from me, like Cudabin and AndyF!!!! Brian
|
|
|
|
|