64 Dodge fenders - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 64 Dodge fenders

Print Thread

64 Dodge fenders #2214356 12/15/16 12:37 PM 12/15/16 12:37 PM
Joined: Jan 2008 Posts: 449 Wisconsin sjs64polara OP mopar
sjs64polara OP mopar Joined: Jan 2008 Posts: 449 Wisconsin	How much do stock fenders weigh for a 64 Dodge?

Re: 64 Dodge fenders [Re: sjs64polara] #2214531 12/15/16 05:14 PM 12/15/16 05:14 PM
Joined: May 2010 Posts: 485 Central California MoParFish mopar
MoParFish mopar Joined: May 2010 Posts: 485 Central California	Not sure but, I'll be paying attention to this thread ... I believe my steel hood with hinges is around 85lbs Sworn Member Central Valley MoPar Drag Pack. You can reach me at (done-et-chasing@going-rounds.gone)... :-) [img]https://s6.postimg.org/v3mbggksx/SAC16.jpg[/img]image hosting more than 5mb

Re: 64 Dodge fenders [Re: sjs64polara] #2214539 12/15/16 05:34 PM 12/15/16 05:34 PM
Joined: May 2011 Posts: 625 Oakville, Wa HOTMOPR mopar
HOTMOPR mopar Joined: May 2011 Posts: 625 Oakville, Wa	Aluminum fenders are light.. 67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials

Re: 64 Dodge fenders [Re: HOTMOPR] #2214590 12/15/16 07:01 PM 12/15/16 07:01 PM
Joined: Jan 2003 Posts: 6,351 Aurora, Oh. M max_maniac master
max_maniac master M Joined: Jan 2003 Posts: 6,351 Aurora, Oh.	Originally Posted By HOTMOPR Aluminum fenders are light.. Yes.... yes they are and expensive too

Re: 64 Dodge fenders [Re: sjs64polara] #2214612 12/15/16 07:50 PM 12/15/16 07:50 PM
Joined: Feb 2003 Posts: 6,849 F fullmetaljacket master
fullmetaljacket master F Joined: Feb 2003 Posts: 6,849	Not by my notes at the moment, but my stock 65'steel fenders stripped of all trim and lights weighed in about 26 Lbs each. The 64's with a little tiny more real estate and ornaments to 'em probably weigh about 29 Lbs each. Aluminum types will weigh about 12-14 lbs each. My A990's shaved about 20 Lbs off the front end.

Re: 64 Dodge fenders [Re: fullmetaljacket] #2214671 12/15/16 09:12 PM 12/15/16 09:12 PM
Joined: Dec 2013 Posts: 4,680 Wichita G GY3 master
GY3 master G Joined: Dec 2013 Posts: 4,680 Wichita	Originally Posted By fullmetaljacket Not by my notes at the moment, but my stock 65'steel fenders stripped of all trim and lights weighed in about 26 Lbs each. The 64's with a little tiny more real estate and ornaments to 'em probably weigh about 29 Lbs each. Aluminum types will weigh about 12-14 lbs each. My A990's shaved about 20 Lbs off the front end. Probably close. My '63 Dodge fenders were 25lbs. apiece as I recall. '63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.

Re: 64 Dodge fenders [Re: sjs64polara] #2214838 12/16/16 12:47 AM 12/16/16 12:47 AM
Joined: Oct 2003 Posts: 1,134 OHIO THE HEART OF IT ALL 64hemi330sedan super stock
64hemi330sedan super stock Joined: Oct 2003 Posts: 1,134 OHIO THE HEART OF IT ALL	my gutted acid dipped fenders weighed around twenty pounds each with just the paint on them. no side trim. I forget how much the trim weighed.

Re: 64 Dodge fenders [Re: sjs64polara] #2214925 12/16/16 03:18 AM 12/16/16 03:18 AM
Joined: Jan 2003 Posts: 31,041 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,041 Oregon	The fenders by themselves don't weigh very much. But by the time you add all of the braces and shields and other parts it starts to add up.

Re: 64 Dodge fenders [Re: 64hemi330sedan] #2214941 12/16/16 04:18 AM 12/16/16 04:18 AM
Joined: Feb 2003 Posts: 6,849 F fullmetaljacket master
fullmetaljacket master F Joined: Feb 2003 Posts: 6,849	That White post is fly.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1