New front suspension on the way from Bob!

Good choice!

Great firewall

what rate springs if i may ask ? nice looking setup !

I will check on the rate, I gave bob the specs on my build and projected race weight and he spec'd it out. Here is a shot of the modified column

Can you give more details on column mods?

Says 250# on the box

I had Bob mod the column for me while he was building my front suspension. Basically he takes the shaft out and cuts the splined end off and puts it in a lathe and turns it to fit a piece of 3/4 moly tube and welds it together. Then cuts the column at the mesh crush area and installs a bushing. The firewall bearing carier is pretty much self explanatory in the previous pics.

Mocking up front end

Making a pattern for tower braces, they slice through inner fender and grab cage snout bars. Also some billet lug nut bling!

Looks awesome like the rest of the build word of caution on the alum. lug nuts from a friend/racer..........they need to be checked very often for tightness or lack there of as he hits em w/a tq wrench constantly.....

yep, directions say check often

Little more progress, clearance for top of the Dana, was little too close to the floor

Got the motor plate back, now can start drive line mock up

cool

For some reason all the pics I am taking with my phone are over the size limit and cant seem to be able to re size them on this pc. Here is a link for FB that has more recent pics https://www.facebook.com/dave.dunse/medi...3123&type=3

Looks awesome..Cant wait to see the end result.

Few more cage progress pics on there today. Still cant get them small enough to post on here

If your on a computer open them in Paint and resize.