Does anyone repro the seal/strip that attaches to the vent window to seal against the main window and has the little piece at the top for the glass? See the pic to see where I mean.

I've looked on the websites of the major parts suppliers and do not see this piece listed.

Thanks!

Call Dixie. I bet they'll know if it is available.

https://dantesparts.com/?s=vent+window&post_type=product&tags=1&ixwps=1

Sorry I though you meant the seal. You are talking about the slide strip with the white plastic holder or the felt channel with the rubber tip?

I am talking about whatever fits inside the vent window frame and has the rounded rubber tip that fits the small curve in the main window. The guy who did the chrome threw them away on me.

Visit your local Chrysler Parts counter and order part number 2932230 for the original part. They retail in the $71.00 range for the one piece mylar slide and clips. There is a reproduction on the market now that retails in the $100 range for a pair.

Thanks! I picked up a set of those and they are installed. I thought there was another piece that had the small rubber tip for the curve in the door glass. I didn't know it was a separate piece. I need to go back to e-bodies!! LOL

Looking at the picture, you will need the small sort of triangle hard rubber stop that goes at the very top of the vent window frame. I sent you a private message as well. Good luck.

Yes! That's what I need!

The good thing is that those pieces are the same from 67-72 2-door hardtops, and probably others as well, shouldn't be to difficult to find good used.

Try Metro


http://metrommp.com/

Looks like this is what you need.

(Am I the only one who takes pics of these things?)

Yes - that is it!

So you just need the rubber tip or both that and the felt channel?

Just the rubber tip. I installed new channel seals.

Not hard to find.