|
checking the sprage?
#212522
02/02/09 11:25 PM
02/02/09 11:25 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
If you unloaded the trans during launch would you check the sprage of your 727? 2800 RPM launch, limiter set at 6800, rear broke at the go light.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: checking the sprage?
[Re: 4bbl]
#212523
02/02/09 11:28 PM
02/02/09 11:28 PM
|
Joined: Dec 2007
Posts: 10,542 BROOK PARK, OH
WILD BILL
Senior Member of the Junior Dragster Club
|
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
|
|
|
Re: checking the sprage?
[Re: dakotahotrodder]
#212526
02/03/09 12:44 AM
02/03/09 12:44 AM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Gave me a chuckle Wade. I did the re-welding and the boxing you suggested. Buying the blanket too. Suppose I better check the sprage, but will I know what I am looking for when I see it? Is the bottom of your right foot itching too?
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: checking the sprage?
[Re: 4bbl]
#212527
02/03/09 01:55 AM
02/03/09 01:55 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I have broke three rear ends on the starting line in the last 2 years..Everytime the sprag in the 727 broke...
|
|
|
Re: checking the sprage?
[Re: 440Jim]
#212531
02/03/09 09:40 PM
02/03/09 09:40 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Thanks all. I'll start by pulling the trans and go from there.
Last edited by 4bbl; 02/04/09 12:14 AM.
4bbl
If you can't hear it coming what's the point.......
|
|
|
|
|
|