Anybody have Stroker Cranks in Stock?
#2094638
06/19/16 10:29 PM
06/19/16 10:29 PM
|
Joined: Jun 2016
Posts: 76 Florida
Interceptor72
OP
member
|
OP
member
Joined: Jun 2016
Posts: 76
Florida
|
Does anybody know of any source that might have stroker cranks in stock? Looking for an RB 4.25" stroke crank. The reason I ask is because I ordered a K1 Technology crank a couple months ago, thru Summit Racing. The wait time was supposed to be 3 weeks, but it keeps getting bumped out. That was about 10 weeks ago. I tried to find out when it would actually get here from Summit, but apparently they don't know and can't say. So I tried to contact K1 to make sure they even received my order. They don't answer their phone, or return voicemails or email. Been trying for a couple of weeks to ontact them and absolutely nobody ever picks up the phone at any of the extensions I've tried. Are they even still in business? Did they just close up shop and all go home? I can be patient if I know when I can expect to receive it, but not if they keep breaking their promised delivery dates, over and over again. I'm thinking I might order a Scat crank, but that's another 3 week wait...which would be fine if I KNEW it would actually be 3 weeks, and not some indefinite anount of time like with K1. So does anybody actually carry these things in stock, or do they all order these things from the manufactuer after you pay them first? Sorry for the rant, but I had to get that off my chest
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: GY3]
#2095028
06/20/16 03:14 PM
06/20/16 03:14 PM
|
Joined: Jan 2003
Posts: 75,005 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,005
U.S.S.A.
|
This would be my choice ...
running up my post count some more .
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: JohnRR]
#2095097
06/20/16 04:52 PM
06/20/16 04:52 PM
|
Joined: Oct 2011
Posts: 559 Idaho
LaRoy Engines
mopar
|
mopar
Joined: Oct 2011
Posts: 559
Idaho
|
This would be my choice ... My choice too. In fact we are waiting on Tom to machine a 4.25 crank from the latest shipment.
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: 493_DART]
#2095226
06/20/16 08:47 PM
06/20/16 08:47 PM
|
Joined: Feb 2005
Posts: 20,174 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,174
PA.
|
I had a kick-azz deal for sale on Moparts several months ago for a balanced 440source 4.250 rotating assembly but I couldn't give it away like most mopar guys like things (I was losing 500 on it) so I'm now building a 512 for my green Duster.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: 493_DART]
#2095792
06/21/16 06:24 PM
06/21/16 06:24 PM
|
Joined: Jun 2004
Posts: 741 Carson City, NV
440sourcedotcom
super stock
|
super stock
Joined: Jun 2004
Posts: 741
Carson City, NV
|
ive ran their bottom end since 2007...zero issues . Here's our "crank room." Every single crank on the shelf is a Big Block Mopar crank. For over twelve years, we've kept several hundred Big Block Mopar cranks in stock and ready to ship. No one else comes anywhere near this level of investment in stock, in the Mopar universe. We guarantee to ship within one business day. If you call in the early to middle part of the day, 99% of the time, it will be on the truck the same day. We don't back order anything, we don't drop ship anything. And shipping (to the lower 48) doesn't cost you a penny. Call us up and you won't be transferred to some "parent company," it's just the same few guys who have always been here. Brandon (since 2003), Kim (Since 2007) and Tim (since 2014.) Our cranks have been used in thousands and thousands of builds from stock rebuilds all the way to 1465 horsepower twin turbo Hot Rod magazine builds. Need it balanced to a specific bobweight? We can do that too, usually within 48 Hours.
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: Interceptor72]
#2095795
06/21/16 06:30 PM
06/21/16 06:30 PM
|
Joined: Jul 2010
Posts: 2,422 Pittsburgh PA
Eric
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,422
Pittsburgh PA
|
Nice picture..... I bought a Molnar
5.53 @ 125 1/8th on the launch control..more left in her!
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: 440sourcedotcom]
#2095835
06/21/16 08:04 PM
06/21/16 08:04 PM
|
Joined: Oct 2011
Posts: 559 Idaho
LaRoy Engines
mopar
|
mopar
Joined: Oct 2011
Posts: 559
Idaho
|
ive ran their bottom end since 2007...zero issues . Here's our "crank room." Every single crank on the shelf is a Big Block Mopar crank. For over twelve years, we've kept several hundred Big Block Mopar cranks in stock and ready to ship. No one else comes anywhere near this level of investment in stock, in the Mopar universe. We guarantee to ship within one business day. If you call in the early to middle part of the day, 99% of the time, it will be on the truck the same day. We don't back order anything, we don't drop ship anything. And shipping (to the lower 48) doesn't cost you a penny. Call us up and you won't be transferred to some "parent company," it's just the same few guys who have always been here. Brandon (since 2003), Kim (Since 2007) and Tim (since 2014.) Our cranks have been used in thousands and thousands of builds from stock rebuilds all the way to 1465 horsepower twin turbo Hot Rod magazine builds. Need it balanced to a specific bobweight? We can do that too, usually within 48 Hours. I must say, I run a 440 Source 4.15 crank with no problems in my personal 500 inch engine. 730 HP with 906 iron heads on pump gas and 928 HP with Victor heads and E85.
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: Interceptor72]
#2095846
06/21/16 08:29 PM
06/21/16 08:29 PM
|
Joined: Feb 2007
Posts: 6,295 U.S.
moparniac
master
|
master
Joined: Feb 2007
Posts: 6,295
U.S.
|
730HP with 906 heads
928HP with victors
WOW
Mopar Performance
|
|
|
Re: Anybody have Stroker Cranks in Stock?
[Re: moparniac]
#2095900
06/21/16 10:17 PM
06/21/16 10:17 PM
|
Joined: Dec 2013
Posts: 4,672 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,672
Wichita
|
Tom with Molnar is a genuinely nice guy and easily accessible. He answered all my questions.
I have no reason to go elsewhere.
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
|
|