What is the right dip stick and tube for a 340 with no a/c
I have a few dip sticks with part#'s on them. and 2 tubes but no #'s on them.
If possibe part# for stick and tube as well as lenth of tube in inches. thanks
Looks like my 340 takes 5.5 quarts with the long filter and stock replacement oil pan.
But think I have wrong tube or stick

No one knows the right lenth dip stick tube or the part# for the stick?

I remember seeeing a member here selling them few years back on ebay, he was also selling the aluim master cyliners.
I don't know his real name since lots of guys here called him E bogger?
Think he was on staff of a mopar mag?

tube 9 1/4
stick 16 7/8

is that tube length the top to bottom length?

I need the Top to block length (where it goes into the block)

The Tube I have and stick are Mopar Performance ones.
The Tube is 8" from where it goes into engine to top and 9" total lenth or so.
The dip stick is 15" from top {the part that stops at the tube when imstallled} to the full mark and 15.5" to the add mark
Not sure I have whats right since I dont think it reads right

this

Tom how far down the stick is the Fill and add marks?I listed above where they are on my stick.15" and 15.5"

My tube is straight not bent at the bottom like yours in the pic.